立即获取报价
博客 2026-11-14

Dongfeng Cummins Flywheel Part Numbers 5313586 5318535

A Dongfeng Cummins flywheel inquiry usually arrives in one line. Flywheel, 138 teeth, Tianjin truck, price please. That line cannot be picked from a shelf.

On our own rack there are five Cummins numbers that answer to that description, and a sixth from a different engine family. They are 5313586, 5318535, 5396507, 5472143, 5472394 and 4973855. All six are photographed on this page, on our floor, not in a catalogue render.

The reason a one-line inquiry fails is simple. The tooth count belongs to the ring gear, not to the flywheel. One ring gear number, 3908546, is listed against more than one flywheel assembly. A buyer who describes the ring gear is describing a group of parts, not one part.

Table of Contents

  1. One Ring Gear Behind Several Flywheels
  2. What 3908546 Is On Paper
  3. Five Numbers From One Supply Chain
  4. The Letter C In Front Of A Number
  5. Where The Catalogues Disagree
  6. What Our Own Castings Show
  7. ISZ13: Two Numbers For One Rating
  8. The M11 Numbers Are A Different Family
  9. Weight And The Wrong Box
  10. How To Order Without Guessing
  11. Questions Buyers Ask
  12. Sources And Evidence Level
  13. Send The Old Part Photograph

One Ring Gear Behind Several Flywheels

Start with the ring gear. A dealer listing for 5318535 names its ring gear in the same line: C3908546. The ring gear has its own catalogue entry, and that entry gives it 138 teeth.

So the number 5318535 and the description 138 teeth are two different pieces of information. One identifies a flywheel assembly. The other identifies the toothed rim pressed onto it. A ring gear of 138 teeth can end up on more than one assembly, because the starter position and the rim diameter are fixed by the housing size, not by the flywheel number.

Cast iron flywheel 5313586 standing on the shop floor, friction face towards the camera, ring gear fitted and a red hand-written number on the face

That is why two buyers can both be right about 138 teeth and still need different parts. The next section puts the ring gear on paper, so the arithmetic is visible rather than assumed.

What 3908546 Is On Paper

Two aftermarket sources describe this ring gear, and they are not the same company. One is a US distributor listing an Interstate McBee part. The other is a European engine parts seller. Their figures agree on teeth and differ slightly on thickness.

Item Value as published
Teeth 138
Outer diameter 17.42 in (443 mm)
Inner diameter 16.24 in (412 mm)
Width 0.610 in (15.5 mm)
Pitch 0.8/10
Housing size SAE 2
Weight 2.1 kg
Engines listed by the European seller 6BT 5.9 through QSL 8.9

The thickness is the one place the two sources part company. One says 0.610 in, which is 15.5 mm. The other says 16 mm. We print both and do not average them, because half a millimetre is exactly the kind of number a buyer uses to argue about a shipment.

The engine list is worth reading twice. A single ring gear is listed from the 5.9 litre B series up to the 8.9 litre L series. That is a wide spread, and it explains why the same 138-tooth description keeps appearing on parts that do not fit each other.

Five Numbers From One Supply Chain

Here is what the trade catalogues claim for each of the six numbers on our rack. The evidence column is the important one. A description repeated by five dealers is still one source if the wording is identical.

Number What the listings say it fits Evidence level
5313586 ISDe and ISB6.7 flywheel assembly. One distributor list groups it under QSB3.9 instead Double source for ISDe, one conflicting list
5318535 DCEC flywheel assembly, 138 teeth, ring gear C3908546, listed for ISB, ISDe and ISLe Single source, wording repeated across listings
5396507 ISDe and ISD China VI flywheel assembly with a 138-tooth ring gear. One marketplace listing says B series Single source, application in conflict
5472143 ISZ13 flywheel assembly, quoted by dealers for Dongfeng, Shaanxi and Liuqi trucks Double source
5472394 ISZ480 to ISZ520 China V flywheel assembly for the Tianlong flagship Single source
4973855 M11, ISM11 and QSM11 flywheel, about 35 kg, ring gear 3065151 Double source for the family, single for the weight

Flywheel 5318535 on the workshop floor, machined face up, ring gear fitted, blue workshop writing near the rim

Two of the six numbers are documented well enough to be repeated as fact. Three are documented once, in language that other sellers copy word for word. One, 5396507, has two catalogues that do not agree with each other.

Rear face of flywheel 5318535, showing the crank flange side and a small green label under the part

None of that makes the parts unusable. It means the catalogue cannot be the last check before payment. The engine plate has to be.

The Letter C In Front Of A Number

Chinese dealers write these numbers two ways. C5318535 and 5318535 appear in the same listing, in the same field, for the same part. The same happens with C5396507 and C5472143.

The letter is a dealer prefix, not a different part. If you send a request for C5318535 to a European supplier, you may get a reply saying the number is unknown. Send seven digits and the reply changes.

This sounds trivial until a purchase order carries the wrong form and comes back rejected. When we quote, we write both forms on the same line.

Where The Catalogues Disagree

Two conflicts are worth printing in full, because both affect real orders.

The first is 5313586. Two English-language sellers list it as an ISDe and ISB6.7 flywheel assembly. A separate distributor parts list puts 5313586 in a QSB3.9 group, next to 5365907 and 5313587. One of those two applications is probably a copy of the other, and we cannot tell which. A 3.9 litre and a 6.7 litre engine sit in different size classes, so a shared flywheel would need checking, not assuming.

The second is 5396507. Several Chinese dealers describe it as an ISDe and ISD China VI flywheel assembly with a 138-tooth ring gear. A marketplace listing for the same number says Cummins B series. The engine families overlap but the emission stage does not.

Flywheel 5396507 face up on the floor, ring gear fitted, green workshop writing across the casting

There is a second layer to the 5396507 confusion. When Dongfeng Cummins moved to China VI, it changed model naming. The ISD6.7 became the D6.7, and the ISZ13 became the Z14. A listing that says ISD China VI therefore mixes an old model name with a new emission stage. It is a description written for search, not a specification.

Our position on both conflicts is the same. We do not pick a side from a listing. We ask for the engine plate.

Rear face of flywheel 5396507, plain machined disc with the centre bore open

What Our Own Castings Show

Six parts on a rack settle the question of what a casting can prove.

On the 5396507 the casting carries a six-digit code that reads 15 11 15 in our photograph. That pattern is a mould or date code. It is not a part number, and we do not quote it as one. The same part has green workshop writing on the face, added after casting.

On the 5313586 the face carries a red hand-written 5313586. Near the rim there is a cast string of seven characters. We enlarged it four times and could not resolve it cleanly, so it stays in our notes and out of this article.

On the 5472143 and 5472394 both parts carry the same red marking, which is a batch code from the yard. It looks like a part number and is not one.

Edge of flywheel 5396507 held in a hand, showing the ring gear teeth in profile

The practical rule that comes out of this is short. Ask for three photographs: the label on the box, the paint or label on the part, and the casting. If a seller can only send the casting, expect a delay, because the number you need is usually not there.

ISZ13: Two Numbers For One Rating

5472143 and 5472394 both come back as ISZ13 parts in the catalogues. One machinery marketplace lists 5472143 for ISZ13 with a companion number 5472142. A dealer quote page shows C5472143 offered for Dongfeng, Shaanxi and Liuqi trucks under the ISZ heading.

5472394 is described more narrowly: ISZ480 to ISZ520, China V, Tianlong flagship.

Two numbers, one engine family, and a power range attached to only one of them. That is the pattern to expect on a 13 litre unit. The flywheel has to match the clutch and the housing, and a fleet that ordered a different transmission gets a different number.

Flywheel 5472143 standing in a carton, friction face up, part number written on the board behind it

We list both, and we do not present one as a replacement for the other. Our own photographs show the same family of hub and a similar bolt circle, which is exactly the situation where a visual match is not enough.

Machined face and bolt circle of flywheel 5472143, hub and pressure plate holes visible

The M11 Numbers Are A Different Family

4973855 is the outsider on the rack. Catalogues place it on the M11, ISM11 and QSM11 engines, with a reference weight of about 35 kg and a ring gear numbered 3065151.

Those engines are a different generation and a different size class from the ISDe and ISZ units above. Three kilograms on a cast iron disc is not a rounding error, and the side photographs in this article show the difference in dish depth.

Face of flywheel 4973855, machined friction surface, ring gear fitted, stacked flywheels behind on a pallet

M11 is already covered in more detail on this site. The M11 flywheel article works through 4974576 and 4974334 and the four pads on the casting, which is where the number usually lives on that family. If your engine plate says M11 or ISM, start there and treat 4973855 as the third number in the same family.

Rear face of flywheel 4973855, plain disc with hub and ring gear on the rim

Weight And The Wrong Box

A shop scale is the cheapest check in the building, and it catches a specific failure: the box is right, the part inside is not.

Our own 5313586 was weighed on the bench scale during stock intake. The reading was 32.05 kg, and that figure is written against the number in our records. A 138-tooth unit that arrives at 29 kg is missing its ring gear, or it is a lighter casting from a different supplier.

Bench scale with green backlit display, flywheel 5313586 resting on the platform below

Weight also separates the families. A 13 litre ISZ unit and a 6.7 litre ISDe unit are not close, and neither one is close to an M11 part at about 35 kg.

Face of flywheel 5472394, ring gear fitted, red batch marking near the rim

This is not a substitute for the number check. It is the check you can run in ten seconds after the number check has already passed, and it is the one that catches a repacked carton.

Rear face of flywheel 5472394 on the floor, hub and bolt holes visible

How To Order Without Guessing

Four checks, in this order, cost nothing and prevent most wrong shipments.

  1. Read the engine plate, not the truck badge. Write down the model and the emission stage. A Tianjin truck can carry more than one engine.
  2. Photograph the old flywheel in three places: the label on the box, the paint or label on the part, and the casting near the rim.
  3. Read the ring gear separately. It has its own number, and on some units it is the only part that carries a readable mark.
  4. Ask the seller which catalogue the fitment came from. If the answer is a marketplace title, treat it as a lead.

Edge view of flywheel 5472394 standing upright, ring gear teeth and a row of holes on the rim

When those four answers match, the price conversation is worth having. When they do not, a discount on the wrong part is still the wrong part, and a 30 kg iron disc is expensive to send back across an ocean.

Questions Buyers Ask

Is 5318535 the same as 5313586?

No. Two numbers, two castings, and our photographs show different hub flanges and different cast marks. Both are advertised with 138 teeth. We do not offer one as a substitute for the other.

Can I simply order a 138-tooth flywheel?

Not safely. The tooth count belongs to the ring gear, and more than one flywheel assembly carries a 138-tooth ring gear. Give the flywheel number and the engine plate.

Does 5396507 fit a China VI engine?

Several dealers say so, and one marketplace listing says B series instead. That is a seller statement, not a factory confirmation. Send the engine plate and we will check the number against it.

What does the C in front of the number mean?

It is a dealer prefix used by Chinese distributors. C5318535 and 5318535 are the same part. Quote seven digits when you write to a supplier outside China.

Can the ring gear be replaced on its own?

Yes. It is a separate number on these engines, which is also why a flywheel can be correct while the teeth are wrong. If the teeth are chipped and the friction face is sound, ask about the ring gear before you ask about the flywheel.

Sources And Evidence Level

Source Used for Level
US distributor entry for ring gear 3908546, Interstate McBee part Teeth 138, diameters, width, pitch, SAE 2 Double, with the row below
European engine parts seller, ring gear 3908546 138 teeth, 16 mm thickness, 2.1 kg, engine list Double, with the row above
Dealer listings for 5318535 138 teeth, ring gear C3908546, ISB to ISLe Single, wording repeated
Two English sellers for 5313586 ISDe and ISB6.7 application Double
Distributor parts list grouping 5313586 QSB3.9 application Single, in conflict
Dealer listings for 5396507 ISD China VI, 138-tooth ring gear Single, wording repeated
Marketplace listing for 5396507 B series application Single, in conflict
Machinery marketplace and dealer quote page for 5472143 ISZ13 application Double
Dealer listing for 5472394 ISZ480 to ISZ520, China V Single
Cummins parts catalogue and one English seller for 4973855 M11, ISM11, QSM11, about 35 kg Double for family
Our own photographs and intake records Cast marks, paint marks, scale reading 32.05 kg Primary

Where this article says a number is documented once, it means exactly that. It is not a claim that the part does not exist, and it is not a claim that the fitment is wrong. It is a statement about how much a buyer should rely on it before paying.

Send The Old Part Photograph

If you are replacing a Dongfeng Cummins flywheel, send the engine plate photograph and the number from the old part. We will tell you which of these numbers it is, and whether the ring gear needs to come with it.

We cast and machine in our own foundry in Changyi, Weifang, Shandong, and we ship FOB Qingdao. Castings are traceable to the heat. If your workshop needs a specific number, say so in the first message and we will confirm it before quoting.

Irene
[email protected]
+86 19953662121
Wangke Industrial Area, Changyi, Weifang, Shandong, China

Related reading on this site: the Cummins 6BT and 6CT number guide, the ISF3.8 size tier article, the ring gear tooth count guide, the SAE housing size guide and the flywheel weight table. The product list and the quote form sit in the main menu.