Get a quote now
Blog 2026-11-16

Cummins 3977540 vs 3977541: One Digit, Two Flywheels

A Cummins 3977540 flywheel part number looks settled. Seven digits, one engine family, one price. Then the next catalogue page lists 3977541 for the same job, and the buyer has to choose between two numbers that differ by one digit.

We took five photographs of the flywheel on our own shelf. We read the casting. We compared it with four public listings. The casting does not match the label on the part. The listings do not match each other.

This page sets out what each side claims, grades the evidence behind it, and lists the checks that settle the question before money moves.

Table of Contents

  1. Two Numbers, One Trade Listing
  2. Why A Single Digit Matters
  3. What Each Catalogue Says
  4. The Same Model List On Both Pages
  5. Where The Weights Disagree
  6. What Our Own Part Shows
  7. The Casting And The Label Disagree
  8. The Ring Gear Is A Separate Ring
  9. The Holes On The Machined Face
  10. The Date Marking Is Not A Part Number
  11. Four Checks Before You Pay
  12. What We Could Not Confirm
  13. Questions Buyers Ask
  14. Sources And Evidence Level
  15. Send The Casting Photograph

Two Numbers, One Trade Listing

Both numbers exist. That is the first thing to establish, because a one digit difference is easy to dismiss as a typing error.

A Cummins parts list on cumparts.net carries DCEC flywheel 3977540 and DCEC flywheel 3977541 as two separate entries, ETFW048 and ETFW049. A Cummins parts site gives each number its own product page. Both pages describe a flywheel, both list one piece per engine.

At the same time, an exporter sells them as a single line: Cummins Flywheel 3977540 3977541. Same description, same photograph, one price band.

So the pair sits in an awkward place. The parts list separates them. The trade merges them. A buyer who asks for a quotation gets whatever the supplier’s own catalogue happens to say.

Why A Single Digit Matters

Cummins numbers inside one family run in sequence. Consecutive numbers usually describe two builds of the same component, not one component with a typo.

Two builds can mean a different ring gear, a different flange thickness, or a different clutch pattern. On a flywheel, each of those changes where the friction face sits relative to the gearbox. Fit the wrong one and the starter still engages. The release bearing does not.

The rule that follows is simple. Never upgrade a quotation from one number to the next without the supplier confirming it in writing, and never accept “they are the same” as the confirmation.

What Each Catalogue Says

Read this table by column, not by row. The weight column splits into two clusters. The engine column splits into two families. No single source covers both.

Number Weight claimed Packing claimed Engines claimed Source
3977540 18.0 kg not stated a 65 model list headed QSB4.5, including ISF3.8, 6B5.9, 4B3.9 Cummins parts site, one page
3977540 40 kg 54 x 54 x 14 cm ISLE, ISBE, 6BT export trading site, one page
3977540 38.4 kg none none, internal record only our own weight sheet
3977541 15 kg 40 x 36 x 12 cm QSB, ISBE, ISDE, QSB6.7 export trading site, one page
3977541 not stated not stated the identical 65 model list, headed QSB4.5 Cummins parts site, one page, marked discontinued
3977541 not stated not stated 6C 8.3 in a LiuGong CLG936D excavator Chinese dealer listing, one seller

Not one of the six rows carries an outside diameter or a tooth count. That gap is the reason this page exists.

The Same Model List On Both Pages

Look closely at the two Cummins parts site rows. The model list is not similar. It is identical, model for model, in the same order, on both numbers.

A list of sixty five engine models does not get rebuilt for each part number. It gets copied from one page to the next. When a list of that length appears twice, it tells you the platform family. It does not tell you which number fits which engine.

This is the same trap we described for a Cummins tooth count that belongs to a ring gear rather than to a flywheel assembly, in our guide to ring gear teeth counts.

Where The Weights Disagree

Fifteen kilos and forty kilos are not a rounding difference. They are twenty five kilos apart, which on a cast iron disc is a different part.

Three explanations fit the data.

The first is size. A four cylinder B series flywheel and a six cylinder one sit roughly twenty kilos apart. If the two numbers are a light disc and a heavy disc, both weights are honest.

The second is scope. A bare flywheel, a flywheel with the ring gear pressed on, and a flywheel in a crate are three different weights for one part number. A packing size of 54 by 54 by 14 cm belongs to the third case.

The third is a copy error. A seller republishes a weight from a neighbouring page and the error survives for years, because nobody weighs a part they are only listing.

Our own sheet records 3977540 at 38.4 kg, which lands in the heavy cluster. The Cummins parts page says 18.0 kg. Both cannot describe the same bare disc.

We did not resolve this from catalogues, because catalogues cannot settle it. A scale settles it in ten seconds. Our page on flywheel weight by part number explains why we treat a weighed photograph as the only usable evidence.

What Our Own Part Shows

The five photographs on this page come from one flywheel on our shelf. We did not clean the surface before shooting, and we did not retouch the markings.

The crank side carries a raised cast number on the rim. It reads 3977541. The last character is a single stroke with a flag at the top and a base, not a closed loop.

Crank side of a Cummins flywheel cast as 3977541, ring gear on the rim and eight bolt holes around the centre bore

The same face has a date marking struck into the surface beside the cast number. It reads 20210610. We treat it as a date, because that is the only reading that fits the format.

Date marking reading 20210610 struck beside the cast number on the same flywheel rim

The letters CHINA are cast into the same band, at the outer edge.

Cast number 3977541 raised in the rim of a Cummins flywheel, photographed on our own stock

The crankshaft flange takes eight bolts, evenly spaced, around a single centre bore.

Eight evenly spaced bolt holes and the centre bore on the crankshaft flange of the flywheel

The other face is machined flat across the full diameter, with a shallow recess around the hub.

Machined face of the same flywheel, flat across the full diameter with a shallow recess around the hub

The Casting And The Label Disagree

Here is the part that matters for anyone quoting from a shelf.

On the same face, next to that cast 3977541, someone has written 3977540 in blue marker. The marker is ours. It is a warehouse label, not a manufacturer mark.

Blue marker writing 3977540 on the same face where the casting reads 3977541

One of the two numbers is wrong for this disc, or the two numbers are close enough in fit that the trade swaps them without noticing. We do not know which, and we are not going to guess on a page that a buyer may quote from.

What we can say is narrower and more useful. If you order 3977540 and receive a disc cast as 3977541, the box is not necessarily wrong. Ask the supplier to confirm the casting number in writing, and keep the photograph.

The Ring Gear Is A Separate Ring

The toothed ring sits on a machined shoulder at the rim. There is a visible joint between the ring and the casting. The teeth are not cut into the flywheel.

Edge view of the flywheel showing ring gear teeth, rim thickness and the recessed hub

Ring gear teeth on the rim, with the machined shoulder the toothed ring sits on and two tapped holes nearby

Two consequences follow for a buyer.

A worn ring gear can be replaced without replacing the flywheel. And a flywheel can be sold with a ring gear fitted or without one, under the same base number plus a suffix.

When one quotation is far cheaper than the others, ask whether the ring gear is included. The answer is often no. Our page on ring gear teeth counts covers why the count on the ring decides interchangeability more often than the flywheel number does.

The Holes On The Machined Face

The machined face carries a circle of small holes close to the outer edge. In the edge-on photograph two of them show internal threads.

Close view of the small holes spaced along the outer edge of the machined face

Inside the ring gear on the crank side there is a second circle of round holes, drilled through the machined band.

Circle of round holes inside the ring gear on the crank side of the flywheel

We are not publishing a count for either circle. A photograph taken at this angle hides two or three holes behind the rim, and a wrong count on a page like this becomes a wrong count in a purchase order.

Count them on the part you hold. If your disc has a different number of holes on that outer circle, it is a different disc, whatever the label says.

The Date Marking Is Not A Part Number

Buyers sometimes quote 20210610 back to us as a part number, because it is the most legible string on the part. It is not a number anyone can sell from.

It sits on one disc, in one font, on a surface that a machining pass would remove. A part number is cast into the mould and appears on every disc from that pattern.

This is the same distinction we set out in our page on timing marks and date codes. Marks on a flywheel fall into functional marks, traceability marks and part numbers. Only the third one buys you a part.

Four Checks Before You Pay

None of the four needs a catalogue.

First, a casting photograph. Both faces, taken with light across the surface rather than straight at it, so raised characters read.

Second, a scale photograph. The disc on a scale, with the casting visible in the same frame. A number in a listing is not a weight. A display is.

Third, the tooth count, counted on the part. Do not count from a photograph, ours included.

Fourth, the bolt pattern on the face, and what bolts to it. Eight bolts on the crankshaft side is a starting point, not an identification. The pattern on the clutch side decides which pressure plate fits.

If you are replacing a flywheel because the face is scored rather than cracked, machining may be cheaper than a new casting. Our page on flywheel resurfacing limits covers how much can come off.

What We Could Not Confirm

We list this section because a page that only reports what it knows is not useful to a buyer choosing between two numbers.

We could not confirm whether 3977540 and 3977541 are two different discs or one disc described two ways.

We could not confirm that 3977541 is discontinued. One Cummins parts page says so. It does not name a replacement.

We could not confirm which engine family 3977541 belongs to. Two sources put it in the QSB and ISBE group. One Chinese dealer lists it as a 6C 8.3 flywheel for an excavator.

We could not confirm a tooth count, an outside diameter or an SAE housing size for either number. No source we found publishes them.

One Chinese content page gives exact bore diameters for both numbers and a third number, 5521364, for a dual mass version. It cites no catalogue and we could not corroborate any of it. We used none of its figures.

Questions Buyers Ask

Is 3977540 the same as 3977541?

They are two entries in the same Cummins parts list, and one exporter sells them as a single line. Our own casting is marked 3977541 while the shelf says 3977540. Treat them as different parts until a supplier confirms otherwise in writing.

Which one fits my QSB4.5?

We cannot answer that from an engine name. The number depends on the ring gear, the face pattern and the clutch that bolts to it. Send both faces, the rim edge and the bolt circle, and we will match against the castings we hold.

Why do two sellers quote 15 kg and 40 kg?

Because they are quoting different things. One may be a bare disc, one an assembly, one a crate. Ask for a photograph of the part on a scale before you accept either number for freight.

Is 3977541 discontinued?

One Cummins parts page marks it that way and does not name a successor. If your supplier quotes 3977541, ask which number supersedes it, and get the answer in writing.

Can you supply from photographs?

Yes, if the photographs show both faces, the rim edge and a rule across the diameter. A photograph of the clutch face alone is not enough in this family.

Do you cast these, or resell them?

We are a foundry. Flywheels are cast, machined and balanced in our own plant, and we work from a drawing or from a sample. Our Cummins range is on the product overview, and ring gears are a separate line on the gear ring page.

Sources And Evidence Level

Claim Source type Level
3977540 and 3977541 are two entries in a Cummins parts list One parts list, two entries Single, but structural
Exporters sell the two numbers as one line One supplier line Single
3977540 is 18.0 kg One Cummins parts page Single
3977540 is 40 kg in a 54 x 54 x 14 cm carton One trading page Single, likely a shipping figure
3977540 is 38.4 kg Our own internal weight sheet Our record, unverified on a scale today
3977541 is 15 kg in a 40 x 36 x 12 cm carton One trading page Single
3977541 is discontinued One Cummins parts page Single
3977541 is a 6C 8.3 flywheel for a LiuGong excavator One Chinese dealer Single, conflicts with the QSB rows
The casting on our shelf reads 3977541 Our own photographs, two views Our own evidence
The shelf label on the same part reads 3977540 Our own photograph Our own evidence
Eight bolts on the crankshaft flange Our own photograph Our own evidence
The ring gear is a separate shrunk-on ring Our own photographs Our own evidence

Two things we deliberately did not do. We did not count teeth from our photographs, because a photograph at this angle cannot be counted reliably. We did not measure the bore from the image, because the scale cannot be read with confidence.

Send The Casting Photograph

If you are holding a flywheel that may be either number, send four photographs. Both faces. The rim edge. The crankshaft flange with a rule across the bolt circle. Add the weight from a scale if you have one.

We will come back with the numbers that match, and with the ones that do not, including the two where our own sources disagree. That answer is more useful than a confident guess.

Send your part number or photographs for a quote.

Irene
Changwei International
Email: [email protected]
WhatsApp and WeChat: +86 199 5366 2121
Weifang, Shandong, China. FOB Qingdao.