{
    "id": 1649,
    "date": "2026-10-14T13:49:27",
    "date_gmt": "2026-10-14T05:49:27",
    "guid": {
        "rendered": "https:\/\/www.changweiintl.com\/en\/?post_type=ccm_blog&#038;p=1649"
    },
    "modified": "2026-10-30T08:31:42",
    "modified_gmt": "2026-10-30T00:31:42",
    "slug": "hino-flywheel-part-numbers-13450-cross-reference-chart",
    "status": "publish",
    "type": "ccm_blog",
    "link": "https:\/\/www.changweiintl.com\/zh_cn\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart",
    "title": {
        "rendered": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart"
    },
    "content": {
        "rendered": "<div class=\"wrap\">\n<h1>HINO Flywheel Part Numbers: 13450 Cross-Reference by Engine<\/h1>\n<p>A HINO flywheel inquiry usually arrives with one of two things attached: a part number, or a set of measurements. Both are a reasonable starting point, and neither is enough on its own.<\/p>\n<p>The part number alone will not tell you which engine the flywheel fits, because HINO used the same number on more than one engine code. The measurements alone will not tell you which part you have, because at 430 mm the HINO range contains at least six different flywheels, and four of them carry the same 137-tooth ring gear.<\/p>\n<p>This page does two things. It collects the HINO flywheel part numbers we were able to cross-check against more than one catalogue, with the diameter, ring gear teeth, bolt hole count and thickness that go with each. Then it explains the four places where HINO flywheels are most often mixed up, and what to measure so that the quote comes back right the first time.<\/p>\n<p>Every photograph on this page is our own part, sitting on our own workshop floor.<\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ol>\n<li><a href=\"#what-a-hino-flywheel-number-tells-you\">What a HINO Flywheel Number Tells You<\/a><\/li>\n<li><a href=\"#flywheels-and-ring-gears-use-different-numbers\">Flywheels and Ring Gears Use Different Numbers<\/a><\/li>\n<li><a href=\"#hino-flywheel-cross-reference-by-engine\">HINO Flywheel Cross-Reference by Engine<\/a><\/li>\n<li><a href=\"#one-part-number-several-engines\">One Part Number, Several Engines<\/a><\/li>\n<li><a href=\"#the-430-mm-collision\">The 430 mm Collision<\/a><\/li>\n<li><a href=\"#eh700-same-diameter-same-teeth-two-bolt-patterns\">EH700: Same Diameter, Same Teeth, Two Bolt Patterns<\/a><\/li>\n<li><a href=\"#ek100-comes-in-four-versions\">EK100 Comes in Four Versions<\/a><\/li>\n<li><a href=\"#j08c-and-h07d-share-a-number\">J08C and H07D Share a Number<\/a><\/li>\n<li><a href=\"#the-older-generation-still-on-the-road\">The Older Generation Still on the Road<\/a><\/li>\n<li><a href=\"#when-your-flywheel-is-past-repair\">When Your Flywheel Is Past Repair<\/a><\/li>\n<li><a href=\"#how-to-identify-a-hino-flywheel-in-four-measurements\">How to Identify a HINO Flywheel in Four Measurements<\/a><\/li>\n<li><a href=\"#what-to-send-with-your-inquiry\">What to Send With Your Inquiry<\/a><\/li>\n<li><a href=\"#faq\">FAQ<\/a><\/li>\n<\/ol>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EH700 flywheel, front face, machined friction surface with ring gear fitted\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-eh700-flywheel-8-hole-front.jpg\" \/><\/p>\n<h2 id=\"what-a-hino-flywheel-number-tells-you\">What a HINO Flywheel Number Tells You<\/h2>\n<p>HINO flywheel assemblies sit in the 13450-xxxxx range. That is the first thing to fix in your head, because it is the single most common source of wrong orders we see.<\/p>\n<p>Toyota flywheels are numbered 13405-xxxxx. HINO flywheels are numbered 13450-xxxxx. The two prefixes differ by one transposed digit, they appear next to each other in the same aftermarket catalogues, and they are not interchangeable. We have had buyers send us a 13405 number and ask for a HINO flywheel, and buyers send a 13450 number and ask for a Toyota one.<\/p>\n<p>A second number family sits alongside the flywheel: 13451-xxxxx. Both appear against the same engine in trade catalogues, which suggests HINO treats the two as a flywheel assembly and a flywheel sub-assembly rather than as two different parts. If you find one number against your engine and the other in your parts book, they are not necessarily a mismatch. Measure before you assume.<\/p>\n<p>What the number does not tell you is the engine. More on that in a moment.<\/p>\n<h2 id=\"flywheels-and-ring-gears-use-different-numbers\">Flywheels and Ring Gears Use Different Numbers<\/h2>\n<p>This is the quiet mistake that costs the most time. A flywheel assembly and a ring gear are two different parts with two different numbers, and buyers regularly order one using the number of the other.<\/p>\n<p>For a HINO 500 with the J08C engine, the flywheel assembly is a 13450 number. The ring gear on its own is 13453-E0070.<\/p>\n<p>So the rule is this. If you need the complete flywheel, quote a 13450 number. If you only need the toothed ring because yours is chewed up, quote a 13453 number and tell us the flywheel number as well. The ring gear is shrunk onto the flywheel, so the two have to match by diameter and tooth count, and the flywheel number is what confirms that.<\/p>\n<p>If your flywheel friction face is still good and only the teeth are worn, replacing the ring gear is the cheaper route. Our guide to how ring gears are fitted and removed, and the temperatures involved, is here: <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/ring-gear-interference-fit-the-math-behind-the-shrink-fit\">ring gear interference fit and the shrink fit<\/a>.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EF750 flywheel, front face with the ring gear and a six-bolt centre flange\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg\" \/><\/p>\n<h2 id=\"hino-flywheel-cross-reference-by-engine\">HINO Flywheel Cross-Reference by Engine<\/h2>\n<p>The table below lists the numbers and dimensions we found in trade catalogues. The last column tells you how strong the evidence is, and we have kept that distinction visible rather than blending everything into one confident list.<\/p>\n<p>Two catalogues means the same number or the same dimensions appeared in at least two independent supplier listings. Single catalogue means we found it once and are passing it on as a reference, not as a verified fact. Sizes only means we have consistent dimensions but no number we could confirm.<\/p>\n<table>\n<thead>\n<tr>\n<th>Engine<\/th>\n<th>Flywheel part number<\/th>\n<th>Diameter<\/th>\n<th>Ring gear teeth<\/th>\n<th>Bolt holes<\/th>\n<th>Thickness<\/th>\n<th>Evidence<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>EH700<\/td>\n<td>13450-2460<\/td>\n<td>325 mm<\/td>\n<td>129T<\/td>\n<td>6H or 8H<\/td>\n<td>14.5 mm<\/td>\n<td>Number single catalogue, sizes from three<\/td>\n<\/tr>\n<tr>\n<td>H06CT<\/td>\n<td>13450-1912<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>H07C<\/td>\n<td>13450-1912<\/td>\n<td>350 mm<\/td>\n<td>129T<\/td>\n<td>8H<\/td>\n<td>14.5 mm<\/td>\n<td>Number and size from different sources<\/td>\n<\/tr>\n<tr>\n<td>H07CT<\/td>\n<td>13450-1912<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>H07D<\/td>\n<td>13450-2830<\/td>\n<td>325 mm<\/td>\n<td>129T<\/td>\n<td>8H<\/td>\n<td>14.5 mm<\/td>\n<td>Number and size from different sources<\/td>\n<\/tr>\n<tr>\n<td>W06E<\/td>\n<td>13450-2020<\/td>\n<td>300 mm<\/td>\n<td>121T<\/td>\n<td>6H<\/td>\n<td>14.5 mm<\/td>\n<td>Number single catalogue, size from two<\/td>\n<\/tr>\n<tr>\n<td>J05C<\/td>\n<td>13450-2851<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>J08C<\/td>\n<td>13450-2830, 13450-E0080, 13450-4750, 13450-E0J60<\/td>\n<td>380 mm<\/td>\n<td>129T<\/td>\n<td>8H, a 6H version also listed<\/td>\n<td>14.5 mm<\/td>\n<td>Three catalogues<\/td>\n<\/tr>\n<tr>\n<td>J08CT<\/td>\n<td>13450-2840<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>Two catalogues<\/td>\n<\/tr>\n<tr>\n<td>J08E<\/td>\n<td>13450-3980, 13450-E0M80, 13450-E0B61<\/td>\n<td>430 mm, a 380 mm flat version also sold<\/td>\n<td>145T at 430 mm, 129T at 380 mm<\/td>\n<td>8H<\/td>\n<td>15 mm to 21 mm<\/td>\n<td>Several catalogues, sizes disagree<\/td>\n<\/tr>\n<tr>\n<td>EM100<\/td>\n<td>13450-1925<\/td>\n<td>380 mm<\/td>\n<td>137T<\/td>\n<td>9H<\/td>\n<td>16.5 mm<\/td>\n<td>Two catalogues, both agree<\/td>\n<\/tr>\n<tr>\n<td>EK100 A<\/td>\n<td>13450-2414<\/td>\n<td>430 mm<\/td>\n<td>143T<\/td>\n<td>8H<\/td>\n<td>17 mm<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EK100 B<\/td>\n<td>&#8211;<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>8H<\/td>\n<td>17 mm<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EK100 C<\/td>\n<td>&#8211;<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>9H<\/td>\n<td>16.5 mm<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EK100 D<\/td>\n<td>&#8211;<\/td>\n<td>430 mm<\/td>\n<td>135T<\/td>\n<td>8H<\/td>\n<td>17 mm<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EK100 FM2P<\/td>\n<td>13450-1203<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>9H<\/td>\n<td>16.5 mm<\/td>\n<td>Number and size from different sources<\/td>\n<\/tr>\n<tr>\n<td>EP100<\/td>\n<td>13450-2413<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>8H<\/td>\n<td>17 mm<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EP100, P11C<\/td>\n<td>13450-2401<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>&#8211;<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>EF750<\/td>\n<td>13450-2393, 13451-1070<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>6H<\/td>\n<td>17 mm to 18.6 mm<\/td>\n<td>Number single catalogue, sizes from two<\/td>\n<\/tr>\n<tr>\n<td>K13C<\/td>\n<td>&#8211;<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>8H<\/td>\n<td>16.5 mm<\/td>\n<td>Sizes only<\/td>\n<\/tr>\n<tr>\n<td>E13C<\/td>\n<td>&#8211;<\/td>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>8H<\/td>\n<td>18.6 mm<\/td>\n<td>Sizes only<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Read the EM100 row first. It is the one number on this page where two independent catalogues gave us the same number and the same dimensions, so it is the one we would quote without a photo.<\/p>\n<p>Everything else on this list should be confirmed against your flywheel before it becomes an order.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO H07CT flywheel, front face with machined friction surface and eight-bolt centre\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-h07ct-flywheel-front.jpg\" \/><\/p>\n<h2 id=\"one-part-number-several-engines\">One Part Number, Several Engines<\/h2>\n<p>This is the part of HINO parts that surprises buyers most. The number 13450-1912 appears in catalogues against three separate engine codes. The number 13450-2830 appears against two more. 13450-2401 is listed against a 1990s engine family and against the much newer P11C at the same time.<\/p>\n<table>\n<thead>\n<tr>\n<th>Part number<\/th>\n<th>Engine codes that appear against it<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>13450-1912<\/td>\n<td>H06CT, H07C, H07CT<\/td>\n<\/tr>\n<tr>\n<td>13450-2830<\/td>\n<td>H07D, J08C<\/td>\n<\/tr>\n<tr>\n<td>13450-2401<\/td>\n<td>P11C, EP100<\/td>\n<\/tr>\n<tr>\n<td>13450-E0B61<\/td>\n<td>J08E, H07D<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>That table cuts both ways, and it is worth being clear about how.<\/p>\n<p>It means a number is not a trap on its own. If you have 13450-1912 and you also have an H07C, you are not necessarily wrong. But it also means the reverse is true: finding your engine code against a number does not prove that number is what is bolted to your crankshaft, because the same number is sold for engines whose flywheels differ in diameter, in tooth count, or in bolt pattern.<\/p>\n<p>The safe reading is this. A matching number narrows the field. It does not close the question. Diameter, teeth and bolt holes close the question.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO H06CT flywheel, front face showing the eight-bolt crankshaft flange\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-h06ct-flywheel-front.jpg\" \/><\/p>\n<p>The H06CT, the H07C and the H07CT all sit against 13450-1912. In the workshop these are the same casting family, which is why one number covers three engine codes.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO J08C flywheel, front face, the number also listed against H07D\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-j08c-flywheel-front.jpg\" \/><\/p>\n<p>The J08C is the other direction of the same problem. The number 13450-2830 is listed against it, and against the H07D. Two different engines, one number, and the flywheels are not the same diameter.<\/p>\n<h2 id=\"the-430-mm-collision\">The 430 mm Collision<\/h2>\n<p>Nowhere in the HINO range is measurement-only identification more dangerous than at 430 mm. This is where the heavy engines live, and they overlap heavily.<\/p>\n<table>\n<thead>\n<tr>\n<th>Diameter<\/th>\n<th>Teeth<\/th>\n<th>Bolt holes<\/th>\n<th>Engine<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>430 mm<\/td>\n<td>135T<\/td>\n<td>8H<\/td>\n<td>EK100 D<\/td>\n<\/tr>\n<tr>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>6H<\/td>\n<td>EF750<\/td>\n<\/tr>\n<tr>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>8H<\/td>\n<td>EK100 B, EP100, K13C, E13C<\/td>\n<\/tr>\n<tr>\n<td>430 mm<\/td>\n<td>137T<\/td>\n<td>9H<\/td>\n<td>EK100 C, EK100 FM2P<\/td>\n<\/tr>\n<tr>\n<td>430 mm<\/td>\n<td>143T<\/td>\n<td>8H<\/td>\n<td>EK100 A<\/td>\n<\/tr>\n<tr>\n<td>430 mm<\/td>\n<td>145T<\/td>\n<td>8H<\/td>\n<td>J08E<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Six flywheels, one diameter. Four of them share the 137-tooth ring gear. Within those four, the bolt hole count is the only thing that separates them, and it splits them into three groups of 6H, 8H and 9H.<\/p>\n<p>So if you send us 430 mm and 137 teeth, we still cannot quote. We need the bolt hole count as well, and on some of them we need the thickness, because the same 137-tooth 8-hole family is sold at both 16.5 mm and 17 mm.<\/p>\n<p>This is the same pattern we describe in our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-by-engine-guide\">HINO flywheel fitment guide<\/a>, and it is why that page is organised by engine family while this page is organised by number. Between the two, you should be able to pin down any HINO flywheel.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EK100 flywheel, front face with the deep recessed centre typical of the 430 mm group\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ek100-flywheel-front.jpg\" \/><\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO J08E flywheel at 430 mm, with a ring of small holes machined near the outer rim\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-j08e-flywheel-430mm-front.jpg\" \/><\/p>\n<p>The J08E photograph above shows a row of small holes machined into the outer face near the rim. Those are not balance holes from the factory. They are what a flywheel looks like after it has been used with a worn starter drive, or after a ring gear has been replaced without re-checking runout. If your flywheel has that pattern, measure the runout before you reuse it. Our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/flywheel-and-ring-gear-runout-tir-how-to-measure-it-and-what-the-limits-actually-are\">runout TIR guide<\/a> gives the limits and the method.<\/p>\n<h2 id=\"eh700-same-diameter-same-teeth-two-bolt-patterns\">EH700: Same Diameter, Same Teeth, Two Bolt Patterns<\/h2>\n<p>The EH700 is the clearest example on this page of why hole count matters.<\/p>\n<p>Catalogues list the EH700 flywheel at 325 mm, 129 teeth, 14.5 mm thick. They then list two versions of it: one with a 6-bolt centre flange, one with an 8-bolt centre flange.<\/p>\n<p>Same diameter. Same ring gear. Same thickness. Different crankshaft bolt pattern.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EH700 flywheel, six-bolt crankshaft flange version\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-eh700-flywheel-6-hole-front.jpg\" \/><\/p>\n<p>The photograph above is the six-bolt EH700. The photograph at the top of this page is the eight-bolt version of the same flywheel. Put them side by side and the difference is obvious. Put a tape measure across them and they are identical.<\/p>\n<p>We hold both. When an EH700 inquiry comes in without a bolt hole count, we ask for it, because we cannot guess which one your truck needs and shipping the wrong one is a wasted month.<\/p>\n<p>If you are not sure how HINO counts these holes, the answer is that it varies by catalogue, which is exactly why we ask for a photograph of the centre flange rather than a number.<\/p>\n<h2 id=\"ek100-comes-in-four-versions\">EK100 Comes in Four Versions<\/h2>\n<p>The EK100 is the other extreme. One engine code, four flywheels in the trade catalogues, and the tooth count changes between them.<\/p>\n<p>The A version is listed at 430 mm, 143 teeth, 8 bolt holes, with part number 13450-2414. The B version drops to 137 teeth at the same 430 mm. The C version stays at 137 teeth but moves to 9 bolt holes. The D version goes to 135 teeth.<\/p>\n<p>Three different tooth counts, two different bolt patterns, one engine family.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EK100 flywheel with cast bosses standing proud of the back face\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ek100-f17-flywheel-front.jpg\" \/><\/p>\n<p>The photograph above is the EK100 variant our workshop records as F17. Look at the difference between it and the EK100 photograph in the previous section. The casting is not the same shape. It has six bosses standing proud around the circumference, and the overall proportion is different.<\/p>\n<p>This is the practical point. When a customer tells us they have an EK100 and sends a photograph, we can often tell which of the four they have from the shape alone. When they send a part number, we cannot, because the catalogue numbers on this engine family are incomplete.<\/p>\n<h2 id=\"j08c-and-h07d-share-a-number\">J08C and H07D Share a Number<\/h2>\n<p>The J08C is one of the most common HINO flywheels we ship, and one of the most confused.<\/p>\n<p>The catalogue number most often quoted for it is 13450-2830. The same number also appears against the H07D. The J08C flywheel is listed at 380 mm with 129 teeth. The H07D is listed at 325 mm with 129 teeth.<\/p>\n<p>Same number, same tooth count, 55 mm apart in diameter.<\/p>\n<p>The J08C also appears with the numbers 13450-E0080, 13450-4750 and 13450-E0J60 in different catalogues, and at least one catalogue lists a 6-bolt version under the last of those while another lists the engine at 8 bolt holes. We are not going to pretend that resolves cleanly. It does not.<\/p>\n<p>What we can tell you is what we do about it. Every J08C flywheel that leaves our floor is checked against the customer&#8217;s own photograph of the centre flange before it is packed.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO H07D flywheel, eight-bolt centre flange, the number shared with J08C\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-h07d-flywheel-8-hole-front.jpg\" \/><\/p>\n<h2 id=\"the-older-generation-still-on-the-road\">The Older Generation Still on the Road<\/h2>\n<p>Africa, the Middle East and Southeast Asia are full of HINO trucks running engines that left the production line decades ago, and the flywheels for them are still being made. The H06CT, H07C, H07D, EH700 and W06E are among the ones we see most, and the EP100 sits at the top of the range above them.<\/p>\n<p>Two things make this group awkward.<\/p>\n<p>The first is that the sizes are small compared with the modern engines, and small flywheels get described loosely. A W06E flywheel is 300 mm across with 121 teeth. A W04D is also 300 mm, also 121 teeth, but with a different bolt pattern. If a customer says 300 mm and 121 teeth, we have two candidates before we even start.<\/p>\n<p>The second is that these engines stayed in service long enough to be rebuilt, and rebuilt badly. Flywheels get surface ground to clean up a scored friction face, which reduces thickness. We have measured EH700 flywheels well under the wear limit, still in service, with the clutch slipping and the owner blaming the clutch.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO EP100 flywheel, nine-bolt centre flange at 430 mm\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ep100-flywheel-9-hole-front.jpg\" \/><\/p>\n<h2 id=\"when-your-flywheel-is-past-repair\">When Your Flywheel Is Past Repair<\/h2>\n<p>Flywheels are not infinitely resurfaceable, and this is the point at which a rebuild turns into a replacement. HINO publishes hard numbers for this on the EH700, and they are a useful reference for the rest of the range.<\/p>\n<p>From the EH700 service manual, a new flywheel measures 17.0 mm thick. The serviceable limit is 16.0 mm. So there is exactly 1.0 mm of material available for resurfacing across the life of the part.<\/p>\n<p>The same manual gives a maximum distortion of 0.3 mm on the friction surface, corrected by grinding, and a runout check after the ring gear is fitted.<\/p>\n<p>The fitting numbers are worth knowing too, because they are tighter than most workshops assume. The ring gear is heated to around 100 degrees Celsius in water for three to four minutes before it is dropped onto the flywheel. When it is bolted, the ring gear bolts take 260 to 320 kg-cm, the flywheel housing to cylinder block bolts take 400 to 500 kg-cm on 10 mm bolts and 650 to 870 kg-cm on 12 mm bolts, and the crankshaft to flywheel bolts take 1,800 to 2,000 kg-cm, which is 131 to 144 lb-ft.<\/p>\n<p>That last figure is the one that gets missed. Crankshaft bolts on these engines are not tightened to a torque you can reach with a feel. They are tightened to a number and turned evenly, in sequence, in several passes, with the alignment marks on the flywheel and the crankshaft collar lined up first.<\/p>\n<p>Treat the 17.0 mm figure as EH700 specific. Other engines in the range use different thicknesses, as the table above shows, and the limit for each is set against that engine&#8217;s own new thickness.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"HINO W06E flywheel, 300 mm, six-bolt centre flange\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-w06e-flywheel-front.jpg\" \/><\/p>\n<h2 id=\"how-to-identify-a-hino-flywheel-in-four-measurements\">How to Identify a HINO Flywheel in Four Measurements<\/h2>\n<p>Four numbers, in this order, will identify almost any HINO flywheel.<\/p>\n<p>Measure the outside diameter of the friction face, not the ring gear. On a flywheel with a fitted ring gear the two differ by the tooth height, which is enough to put you in the wrong size band.<\/p>\n<p>Count the ring gear teeth. Count them twice, and mark the starting tooth with chalk. A miscount of one tooth is easy to make and hard to notice, and one tooth is enough to change the answer.<\/p>\n<p>Count the bolt holes in the centre flange. This is the field that separates the EH700 pair, the 430 mm group, and several others. Count the holes on the crankshaft side, and note whether there is a single offset dowel hole in addition to the bolt circle.<\/p>\n<p>Measure the thickness across the friction face. Grinding during a previous rebuild removes material, so a used flywheel will read thin. If you are buying a replacement this matters less, but if you are telling us the part is fine, it matters a great deal.<\/p>\n<p>Take photographs of both faces and the centre flange while you have it off. A photograph of the centre flange resolves more questions than any number you can type into a message.<\/p>\n<h2 id=\"what-to-send-with-your-inquiry\">What to Send With Your Inquiry<\/h2>\n<p>Send us the flywheel part number if you have it, and tell us the engine code. Send the four measurements above. Send photographs of both faces.<\/p>\n<p>With those, we can quote a HINO flywheel against your actual part rather than against a catalogue description, which is the difference between one shipment and three.<\/p>\n<p>We cast, machine and assemble flywheels in our own foundry in Changyi, Shandong, to IATF 16949. Ring gears are fitted and checked for runout before the flywheel is packed. If you want to see the range we build for HINO, it is on our <a href=\"https:\/\/www.changweiintl.com\/en\/product\/hino-engine-flywheel\">HINO engine flywheel page<\/a>. Ring gears on their own are here: <a href=\"https:\/\/www.changweiintl.com\/en\/product\/gear-ring\">flywheel ring gears<\/a>. If your identification rests on tooth count, our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/flywheel-ring-gear-teeth-count-guide\">ring gear teeth count guide<\/a> explains why the same engine can carry more than one tooth count.<\/p>\n<h2 id=\"faq\">FAQ<\/h2>\n<h3 id=\"what-part-number-series-do-hino-flywheels-use\">What part number series do HINO flywheels use?<\/h3>\n<p>HINO flywheel assemblies sit in the 13450-xxxxx range. A second family, 13451-xxxxx, appears against the same engines and is best treated as the same part under a sub-assembly number. HINO ring gears used on their own are numbered 13453-xxxxx, for example 13453-E0070 on the J08C. Do not confuse these with Toyota flywheels, which use 13405-xxxxx.<\/p>\n<h3 id=\"why-does-one-hino-part-number-fit-several-engines\">Why does one HINO part number fit several engines?<\/h3>\n<p>HINO reused flywheel numbers across engine codes that shared a casting. The number 13450-1912 is listed against the H06CT, H07C and H07CT. The number 13450-2830 is listed against the H07D and the J08C, which are 55 mm apart in diameter. A matching number narrows the search but does not confirm the part, so always confirm with diameter, teeth and bolt holes.<\/p>\n<h3 id=\"can-i-identify-a-hino-flywheel-by-diameter-and-tooth-count-alone\">Can I identify a HINO flywheel by diameter and tooth count alone?<\/h3>\n<p>Not at 430 mm. Six HINO flywheels use a 430 mm diameter and four of them use the same 137-tooth ring gear. They are separated by bolt hole count, which splits them into 6-hole, 8-hole and 9-hole versions, and in one case by thickness as well.<\/p>\n<h3 id=\"the-eh700-is-listed-at-325-mm-and-129-teeth-but-two-different-parts-come-up-why\">The EH700 is listed at 325 mm and 129 teeth but two different parts come up. Why?<\/h3>\n<p>The EH700 flywheel was made with both a 6-bolt and an 8-bolt crankshaft flange at the same 325 mm diameter and the same 129-tooth ring gear. Both are current parts and both are correct for the engine depending on the build. You have to count the bolt holes in the centre flange to tell them apart. We hold both versions.<\/p>\n<h3 id=\"how-do-i-know-if-my-flywheel-is-too-thin-to-reuse\">How do I know if my flywheel is too thin to reuse?<\/h3>\n<p>HINO gives 17.0 mm as the new thickness of an EH700 flywheel and 16.0 mm as the serviceable limit, so there is 1.0 mm of material for resurfacing over the life of the part. If a previous rebuild has already taken that margin, the flywheel is scrap. Other engines in the HINO range use different thicknesses, and the limit is always set against that engine&#8217;s own new thickness.<\/p>\n<h3 id=\"is-the-ring-gear-sold-separately-from-the-flywheel\">Is the ring gear sold separately from the flywheel?<\/h3>\n<p>Yes. The ring gear is a separate part with its own number in the 13453-xxxxx range. It is shrunk onto the flywheel by heating it, and it can be replaced on its own if the friction face of the flywheel is still within limits. Give us the flywheel number as well as the ring gear number so we can confirm the pair.<\/p>\n<h3 id=\"what-are-the-small-holes-around-the-outer-face-of-a-used-flywheel\">What are the small holes around the outer face of a used flywheel?<\/h3>\n<p>They are usually not factory balance holes. A ring of small holes machined near the rim normally means the flywheel ran with a worn starter drive, or that a ring gear was replaced without re-checking runout afterwards. Check the radial runout before reusing that flywheel.<\/p>\n<h3 id=\"can-you-supply-a-hino-flywheel-against-my-sample-or-drawing\">Can you supply a HINO flywheel against my sample or drawing?<\/h3>\n<p>Yes. We cast and machine in our own foundry in Changyi, Shandong, and we work from samples and drawings as well as from part numbers. Send photographs of both faces and the centre flange, plus the engine code, and we will come back with the size group and a quotation.<\/p>\n<h2 id=\"get-a-hino-flywheel-quote\">Get a HINO Flywheel Quote<\/h2>\n<p>Send the engine code, the flywheel part number if you have one, and photographs of both faces. If you cannot read the number, send the four measurements instead. We will tell you which of the versions above you are holding and quote from there.<\/p>\n<p>Reach us at <a href=\"https:\/\/www.changweiintl.com\/en\/quote\">our inquiry page<\/a>, or write to Irene at irene19953662121@gmail.com, or on WhatsApp and WeChat at +86 19953662121. We are in Changyi, Weifang, Shandong, and we ship FOB Qingdao.<\/p>\n<p>Related reading: <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-by-engine-guide\">HINO flywheel fitment by engine family<\/a> and <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/flywheel-ring-gear-teeth-count-guide\">flywheel ring gear teeth count<\/a>.<\/p>\n<\/div>\n<p><!-- cw-schema:begin --><br \/>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"BlogPosting\",\"headline\":\"HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart\",\"datePublished\":\"2026-10-14T13:49:27\",\"dateModified\":\"2026-10-14T13:49:28\",\"author\":{\"@type\":\"Organization\",\"name\":\"Changwei Intelligent Equipment\",\"url\":\"https:\/\/www.changweiintl.com\"},\"publisher\":{\"@type\":\"Organization\",\"name\":\"Changwei Intelligent Equipment\",\"url\":\"https:\/\/www.changweiintl.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\/\/www.changweiintl.com\/logo.png\"}},\"mainEntityOfPage\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart\"},\"inLanguage\":\"en\"}<\/script><br \/>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"What part number series do HINO flywheels use?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"HINO flywheel assemblies sit in the 13450-xxxxx range. A second family, 13451-xxxxx, appears against the same engines and is best treated as the same part under a sub-assembly number. HINO ring gears used on their own are numbered 13453-xxxxx, for example 13453-E0070 on the J08C. Do not confuse these with Toyota flywheels, which use 13405-xxxxx.\"}},{\"@type\":\"Question\",\"name\":\"Why does one HINO part number fit several engines?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"HINO reused flywheel numbers across engine codes that shared a casting. The number 13450-1912 is listed against the H06CT, H07C and H07CT. The number 13450-2830 is listed against the H07D and the J08C, which are 55 mm apart in diameter. A matching number narrows the search but does not confirm the part, so always confirm with diameter, teeth and bolt holes.\"}},{\"@type\":\"Question\",\"name\":\"Can I identify a HINO flywheel by diameter and tooth count alone?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not at 430 mm. Six HINO flywheels use a 430 mm diameter and four of them use the same 137-tooth ring gear. They are separated by bolt hole count, which splits them into 6-hole, 8-hole and 9-hole versions, and in one case by thickness as well.\"}},{\"@type\":\"Question\",\"name\":\"The EH700 is listed at 325 mm and 129 teeth but two different parts come up. Why?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"The EH700 flywheel was made with both a 6-bolt and an 8-bolt crankshaft flange at the same 325 mm diameter and the same 129-tooth ring gear. Both are current parts and both are correct for the engine depending on the build. You have to count the bolt holes in the centre flange to tell them apart. We hold both versions.\"}},{\"@type\":\"Question\",\"name\":\"How do I know if my flywheel is too thin to reuse?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"HINO gives 17.0 mm as the new thickness of an EH700 flywheel and 16.0 mm as the serviceable limit, so there is 1.0 mm of material for resurfacing over the life of the part. If a previous rebuild has already taken that margin, the flywheel is scrap. Other engines in the HINO range use different thicknesses, and the limit is always set against that engine's own new thickness.\"}},{\"@type\":\"Question\",\"name\":\"Is the ring gear sold separately from the flywheel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The ring gear is a separate part with its own number in the 13453-xxxxx range. It is shrunk onto the flywheel by heating it, and it can be replaced on its own if the friction face of the flywheel is still within limits. Give us the flywheel number as well as the ring gear number so we can confirm the pair.\"}},{\"@type\":\"Question\",\"name\":\"What are the small holes around the outer face of a used flywheel?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"They are usually not factory balance holes. A ring of small holes machined near the rim normally means the flywheel ran with a worn starter drive, or that a ring gear was replaced without re-checking runout afterwards. Check the radial runout before reusing that flywheel.\"}},{\"@type\":\"Question\",\"name\":\"Can you supply a HINO flywheel against my sample or drawing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. We cast and machine in our own foundry in Changyi, Shandong, and we work from samples and drawings as well as from part numbers. Send photographs of both faces and the centre flange, plus the engine code, and we will come back with the size group and a quotation.\"}}]}<\/script><br \/>\n<!-- cw-schema:end --><\/p>",
        "protected": false
    },
    "excerpt": {
        "rendered": "<p>HINO Flywheel Part Numbers: 13450 Cross-Reference by En [&hellip;]<\/p>",
        "protected": false
    },
    "author": 1,
    "featured_media": 1637,
    "template": "",
    "meta": {
        "_yoast_wpseo_focuskw": "HINO Flywheel",
        "_yoast_wpseo_title": "",
        "_yoast_wpseo_metadesc": "",
        "_cw_seo_title_en": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart",
        "_cw_seo_metadesc_en": "HINO flywheel part numbers 13450-1912, 13450-2830 and 13450-2414, plus 13453 ring gears. Sizes and ring gear teeth for J08C, J08E, H07C, EK100 and EH700."
    },
    "ccm_blog_tag": [],
    "class_list": [
        "post-1649",
        "ccm_blog",
        "type-ccm_blog",
        "status-publish",
        "has-post-thumbnail",
        "hentry"
    ],
    "yoast_head": "<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.changweiintl.com\/zh_cn\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart\/\" \/>\n<meta property=\"og:locale\" content=\"zh_CN\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.\" \/>\n<meta property=\"og:description\" content=\"HINO Flywheel Part Numbers: 13450 Cross-Reference by En [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.changweiintl.com\/zh_cn\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart\/\" \/>\n<meta property=\"og:site_name\" content=\"Weifang Changwei Intelligent Equipment Co., Ltd.\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61573276931730\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-30T00:31:42+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1200\" \/>\n\t<meta property=\"og:image:height\" content=\"1270\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4\" \/>\n\t<meta name=\"twitter:data1\" content=\"22 \u5206\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart\",\"name\":\"HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/hino-ef750-flywheel-front.jpg\",\"datePublished\":\"2026-10-14T05:49:27+00:00\",\"dateModified\":\"2026-10-30T00:31:42+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart#breadcrumb\"},\"inLanguage\":\"zh-Hans\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/hino-ef750-flywheel-front.jpg\",\"contentUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/10\\\/hino-ef750-flywheel-front.jpg\",\"width\":1200,\"height\":1270,\"caption\":\"hino-ef750-flywheel-front\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/blog\\\/hino-flywheel-part-numbers-13450-cross-reference-chart#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"\u9996\u9875\",\"item\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"\u535a\u5ba2\",\"item\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#website\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/\",\"name\":\"Weifang Changwei Inteligent Equipment Co, Ltd\",\"description\":\"\u660c\u7ef4\u667a\u80fd\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.changweiintl.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"zh-Hans\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#organization\",\"name\":\"Weifang Changwei Intelligent Equipment Co., Ltd.\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"zh-Hans\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/1782266646-favicon-512.png\",\"contentUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/1782266646-favicon-512.png\",\"width\":512,\"height\":512,\"caption\":\"Weifang Changwei Inteligent Equipment Co, Ltd\"},\"image\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61573276931730\"],\"legalName\":\"Weifang Changwei Intelligent Equipment Co., Ltd.\",\"alternateName\":[\"Changwei\",\"\u6f4d\u574a\u660c\u7ef4\u667a\u80fd\u8bbe\u5907\u6709\u9650\u516c\u53f8\"],\"address\":{\"@type\":\"PostalAddress\",\"streetAddress\":\"Zhicheng World Trade Center, High-Tech Zone\",\"addressLocality\":\"Weifang\",\"addressRegion\":\"Shandong\",\"addressCountry\":\"CN\"},\"contactPoint\":[{\"@type\":\"ContactPoint\",\"contactType\":\"sales\",\"availableLanguage\":[\"en\",\"zh\"],\"email\":\"tony15589697779@gmail.com\",\"telephone\":\"+8615589697779\"}],\"knowsAbout\":[\"engine flywheel\",\"flywheel ring gear\",\"flywheel housing\",\"gear chamber\",\"OEM engine components\",\"IATF 16949 certified manufacturing\"],\"areaServed\":\"Worldwide\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->",
    "yoast_head_json": {
        "title": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.",
        "robots": {
            "index": "index",
            "follow": "follow",
            "max-snippet": "max-snippet:-1",
            "max-image-preview": "max-image-preview:large",
            "max-video-preview": "max-video-preview:-1"
        },
        "canonical": "https:\/\/www.changweiintl.com\/zh_cn\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart\/",
        "og_locale": "zh_CN",
        "og_type": "article",
        "og_title": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.",
        "og_description": "HINO Flywheel Part Numbers: 13450 Cross-Reference by En [&hellip;]",
        "og_url": "https:\/\/www.changweiintl.com\/zh_cn\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart\/",
        "og_site_name": "Weifang Changwei Intelligent Equipment Co., Ltd.",
        "article_publisher": "https:\/\/www.facebook.com\/profile.php?id=61573276931730",
        "article_modified_time": "2026-10-30T00:31:42+00:00",
        "og_image": [
            {
                "width": 1200,
                "height": 1270,
                "url": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg",
                "type": "image\/jpeg"
            }
        ],
        "twitter_card": "summary_large_image",
        "twitter_misc": {
            "\u9884\u8ba1\u9605\u8bfb\u65f6\u95f4": "22 \u5206"
        },
        "schema": {
            "@context": "https:\/\/schema.org",
            "@graph": [
                {
                    "@type": "WebPage",
                    "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart",
                    "url": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart",
                    "name": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.",
                    "isPartOf": {
                        "@id": "https:\/\/www.changweiintl.com\/#website"
                    },
                    "primaryImageOfPage": {
                        "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage"
                    },
                    "image": {
                        "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage"
                    },
                    "thumbnailUrl": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg",
                    "datePublished": "2026-10-14T05:49:27+00:00",
                    "dateModified": "2026-10-30T00:31:42+00:00",
                    "breadcrumb": {
                        "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart#breadcrumb"
                    },
                    "inLanguage": "zh-Hans",
                    "potentialAction": [
                        {
                            "@type": "ReadAction",
                            "target": [
                                "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart"
                            ]
                        }
                    ]
                },
                {
                    "@type": "ImageObject",
                    "inLanguage": "zh-Hans",
                    "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart#primaryimage",
                    "url": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg",
                    "contentUrl": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/10\/hino-ef750-flywheel-front.jpg",
                    "width": 1200,
                    "height": 1270,
                    "caption": "hino-ef750-flywheel-front"
                },
                {
                    "@type": "BreadcrumbList",
                    "@id": "https:\/\/www.changweiintl.com\/en\/blog\/hino-flywheel-part-numbers-13450-cross-reference-chart#breadcrumb",
                    "itemListElement": [
                        {
                            "@type": "ListItem",
                            "position": 1,
                            "name": "\u9996\u9875",
                            "item": "https:\/\/www.changweiintl.com\/en\/"
                        },
                        {
                            "@type": "ListItem",
                            "position": 2,
                            "name": "\u535a\u5ba2",
                            "item": "https:\/\/www.changweiintl.com\/blog"
                        },
                        {
                            "@type": "ListItem",
                            "position": 3,
                            "name": "HINO Flywheel Part Numbers 13450: J08C, J08E, H07C, EH700 Chart"
                        }
                    ]
                },
                {
                    "@type": "WebSite",
                    "@id": "https:\/\/www.changweiintl.com\/#website",
                    "url": "https:\/\/www.changweiintl.com\/",
                    "name": "Weifang Changwei Inteligent Equipment Co, Ltd",
                    "description": "\u660c\u7ef4\u667a\u80fd",
                    "publisher": {
                        "@id": "https:\/\/www.changweiintl.com\/#organization"
                    },
                    "potentialAction": [
                        {
                            "@type": "SearchAction",
                            "target": {
                                "@type": "EntryPoint",
                                "urlTemplate": "https:\/\/www.changweiintl.com\/?s={search_term_string}"
                            },
                            "query-input": {
                                "@type": "PropertyValueSpecification",
                                "valueRequired": true,
                                "valueName": "search_term_string"
                            }
                        }
                    ],
                    "inLanguage": "zh-Hans"
                },
                {
                    "@type": "Organization",
                    "@id": "https:\/\/www.changweiintl.com\/#organization",
                    "name": "Weifang Changwei Intelligent Equipment Co., Ltd.",
                    "url": "https:\/\/www.changweiintl.com\/",
                    "logo": {
                        "@type": "ImageObject",
                        "inLanguage": "zh-Hans",
                        "@id": "https:\/\/www.changweiintl.com\/#\/schema\/logo\/image\/",
                        "url": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/06\/1782266646-favicon-512.png",
                        "contentUrl": "https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/06\/1782266646-favicon-512.png",
                        "width": 512,
                        "height": 512,
                        "caption": "Weifang Changwei Inteligent Equipment Co, Ltd"
                    },
                    "image": {
                        "@id": "https:\/\/www.changweiintl.com\/#\/schema\/logo\/image\/"
                    },
                    "sameAs": [
                        "https:\/\/www.facebook.com\/profile.php?id=61573276931730"
                    ],
                    "legalName": "Weifang Changwei Intelligent Equipment Co., Ltd.",
                    "alternateName": [
                        "Changwei",
                        "\u6f4d\u574a\u660c\u7ef4\u667a\u80fd\u8bbe\u5907\u6709\u9650\u516c\u53f8"
                    ],
                    "address": {
                        "@type": "PostalAddress",
                        "streetAddress": "Zhicheng World Trade Center, High-Tech Zone",
                        "addressLocality": "Weifang",
                        "addressRegion": "Shandong",
                        "addressCountry": "CN"
                    },
                    "contactPoint": [
                        {
                            "@type": "ContactPoint",
                            "contactType": "sales",
                            "availableLanguage": [
                                "en",
                                "zh"
                            ],
                            "email": "tony15589697779@gmail.com",
                            "telephone": "+8615589697779"
                        }
                    ],
                    "knowsAbout": [
                        "engine flywheel",
                        "flywheel ring gear",
                        "flywheel housing",
                        "gear chamber",
                        "OEM engine components",
                        "IATF 16949 certified manufacturing"
                    ],
                    "areaServed": "Worldwide"
                }
            ]
        }
    },
    "_links": {
        "self": [
            {
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/ccm_blog\/1649",
                "targetHints": {
                    "allow": [
                        "GET"
                    ]
                }
            }
        ],
        "collection": [
            {
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/ccm_blog"
            }
        ],
        "about": [
            {
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/types\/ccm_blog"
            }
        ],
        "author": [
            {
                "embeddable": true,
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/users\/1"
            }
        ],
        "version-history": [
            {
                "count": 2,
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/ccm_blog\/1649\/revisions"
            }
        ],
        "predecessor-version": [
            {
                "id": 1940,
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/ccm_blog\/1649\/revisions\/1940"
            }
        ],
        "wp:featuredmedia": [
            {
                "embeddable": true,
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/media\/1637"
            }
        ],
        "wp:attachment": [
            {
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/media?parent=1649"
            }
        ],
        "wp:term": [
            {
                "taxonomy": "ccm_blog_tag",
                "embeddable": true,
                "href": "https:\/\/www.changweiintl.com\/zh_cn\/wp-json\/wp\/v2\/ccm_blog_tag?post=1649"
            }
        ],
        "curies": [
            {
                "name": "wp",
                "href": "https:\/\/api.w.org\/{rel}",
                "templated": true
            }
        ]
    }
}