立即获取报价
博客 2026-10-29

Yuchai Flywheel Part Numbers: Six 1005 Series Explained

Yuchai Flywheel Part Numbers: Six 1005 Series and Thirteen Numbers for One Engine

A customer sends a photo of a flywheel and one line of text: E0301-1005360. He wants a price. The number is correct, the part exists, and we still cannot quote it, because that number alone does not tell us which of six different Yuchai 1005 series he is holding, and on one engine family thirteen different flywheel numbers are in circulation.

This article is about how Yuchai numbers its flywheels, why the model prefix carries more information than the part number, and what we found when we put two of our own samples side by side and traced each one back to a real engine.

Table of Contents

The number on the box is not the number on the part

Yuchai part numbers are usually read as two pieces joined by a hyphen: a model prefix in front, a drawing number behind. The prefix identifies the engine platform the part was released against. The drawing number identifies what the part is inside that platform.

Most buyers quote only the second half. That is where the trouble starts, because the drawing number is not unique across the range. The same 1005360 block appears under more than a dozen different prefixes, fitted to engines with nothing in common except the badge on the rocker cover.

We have a foundry and a machine shop, and we make flywheels to drawing for Chinese engine families including Yuchai. When a customer quotes a bare drawing number, our first reply is always the same: send the engine plate, not the part number.

How Yuchai numbers work: the function block

The first four digits after the hyphen are a function block. They are inherited from a numbering convention that Yuchai has used for decades, and they are consistent enough to be useful.

Block System Example
1002 Cylinder block M1300-1002106 liner, YC6M
1003 Cylinder head M3000-1003111B intake valve
1004 Connecting rod and piston M3400-1004002 piston rings
1005 Crankshaft and flywheel M3400-1005010 crankshaft
1006 Camshaft M3400-1006002A timing gear
1008 Intake and exhaust M3400-1008202A rear exhaust manifold
1009 Oil pan M3400-1009040A oil pan assembly
1600 Flywheel housing E0300-1600401A housing

The 1005 block is where flywheels live, and the reason is mechanical rather than administrative. A flywheel bolts directly to the crankshaft flange, so it belongs to the crankshaft drawing group. Anything in 1005 is either the crank, something bolted to the crank, or something that spins with it.

This is worth knowing because it gives you a fast first filter. If a number carries 1005, it is crank-side. If it carries 1600, it is housing-side, which means it bolts to the block and the starter mounts to it. Buyers mix these two up more often than any other pair.

Six different 1005 series all sold as flywheel

Inside 1005, Yuchai uses several sub-series. All of them are sold as flywheel or flywheel and ring gear assembly. There is no published rule that says which one applies to which engine platform, and we have not found a distributor who can explain the split.

Sub-series Real example Market name Engine
1005060 532-1005060A Flywheel assembly YC4110ZQ
1005060 B8200-1005060 Flywheel assembly YC4108ZQ
1005061 M3400-1005061A Flywheel YC6M, construction
1005160 M3400-1005160A Flywheel and ring gear assembly YC6M, construction
1005260 E0801-1005260 Flywheel assembly YC4110ZQ
1005260 E05KB-1005260 Flywheel assembly YC4110ZQ
1005360 E0301-1005360 Flywheel and ring gear assembly YC4E140, YC4E160, YC4E180
1005360 A3206-1005360 Flywheel assembly Yuchai four cylinder
1005360 M36S1-1005360A-911 Flywheel and ring gear assembly Yuchai six cylinder
1005361 M3400-1005361B Flywheel YC6M360-20
1005361 J41DC-1005361 Flywheel YC6J190-20
1005361 D08JJ-1005361 Flywheel and ring gear assembly YC4D130-30
1005361 S52LA-1005361 Flywheel assembly Dongfeng chassis, Yuchai engine
1005361 FC7LA-1005361A Solid flywheel, 159 teeth Yutong ZK6551, ZK6601

Six sub-series, one component. The two dominant ones are 1005360 and 1005361, which differ by a single digit at the end. Anyone reading quickly will treat them as the same part. They are not. On the same YC6M platform, 1005061 and 1005160 are also both listed, one as the bare flywheel and one as the assembly with the ring gear already fitted.

That last point is the cleanest structural finding in this whole exercise. On YC6M, Yuchai publishes M3400-1005061A as the flywheel and M3400-1005160A as the flywheel and ring gear assembly. Two numbers, two levels, same platform. If a customer needs only the ring gear, neither number is what he wants, and quoting either will send him a complete unit he does not need.

One engine, thirteen flywheel numbers

Take a single engine, the YC4110ZQ, which is the four cylinder YC4E family used across light and medium trucks. Between a public Yuchai catalogue for that engine and two distributor parts lists, we counted at least thirteen distinct flywheel assembly numbers sold for it.

Number Suffix meaning Note
E0301-1005360 base the most commonly quoted
E0301-1005360-911 -911 variant same base number, different suffix
E0300-1005360 sibling prefix one digit off in the model block
E0201-1005060A 1005060 series different sub-series entirely
E0201-1005360B revision B
E0271-1005360
E0288-1005260 1005260 series
E0401-1005360
E0801-1005260 1005260 series listed with 380 and 395 pressure plate
E1201-1005360 cross-listed with E0288 distributors show both numbers for one item
E05KB-1005260 1005260 series
E53E5-1005360
532-1005060A pure numeric prefix

Thirteen numbers, one engine. They are not interchangeable revisions of one design. They differ in ring gear tooth count, in pressure plate bolt circle, in overall depth, and in which clutch the truck was built with. The engine plate tells you the engine. It does not tell you which of the thirteen the chassis builder fitted.

This is why we ask for photos of the old part as well. The number gets you into the right neighbourhood. Three photos get you to the right house.

What our two samples actually are

We pulled two flywheels from our own stock, photographed both, and traced the file names back to real numbers.

The first is filed under M3400. M3400 is the drawing prefix for the YC6M platform, the ten litre six cylinder. Two flywheel numbers are published under that prefix: M3400-1005061A for construction machinery and M3400-1005361B for the YC6M360-20 truck engine. Our sample has a deep recessed friction face and a ring gear pressed onto a relatively thin dished disc, which is truck architecture, not generator or loader architecture.

Yuchai M3400 prefix flywheel, friction face up, cast and machined in our shop

The second is filed under E0301. E0301-1005360 is published as the flywheel and ring gear assembly for the YC4E140, the YC4E160 and the YC4E180, with a 108 tooth ring gear. Our sample matches that description: a flatter face with a raised centre boss, a distinctly separate ring gear band, and a shallower overall section than the M3400 part.

Yuchai E0301-1005360 flywheel and ring gear assembly for YC4E engines

Neither casting carries a readable part number. We put both under magnification and the cast marks we could find are mould and batch codes, not the number on the box. We are not going to invent one. The identification above is by structure and by matching the published description, and we say so plainly rather than dressing it up as a positive read.

For what it is worth, the rear face of the E0301 sample carries a cast mark in the centre boss area. At eight times magnification it is legible as a short alphanumeric string, but not as a number we can tie to a catalogue entry, so we do not publish a guess.

Rear face of the E0301 flywheel, showing the eight bolt crankshaft flange

Two flywheels side by side: what the photos show

Put the two face up next to each other and the difference is not subtle.

The M3400 part has a recessed friction face with two machined steps. The friction surface sits below the rim, then drops into a deeper cavity, then rises to a machined centre boss. That stepped geometry exists to swallow the clutch disc and give the pressure plate a defined mounting plane. It is a truck flywheel.

The E0301 part is much flatter. The friction surface is close to the ring gear plane, the centre boss is a distinct raised cylinder, and the whole disc is shallower. That is the geometry you see where the flywheel has to sit inside a tighter bellhousing, which is exactly the constraint on a medium truck or a bus.

Side profile of the M3400 flywheel showing the separate ring gear band

Both have eight crankshaft bolt holes and one separate dowel hole outside the bolt circle. That is the single most misleading thing about these two parts: the crankshaft flange pattern is identical. If your only check is hole count, both flywheels pass, and you will ship the wrong one.

Side profile of the E0301 flywheel, ring gear band clearly separate from the disc

On both, the ring gear is a separate band pressed onto the rim, not cut into the casting. From the side you can see the joint line and the step where the band seats. That matters commercially: a worn ring gear does not condemn the flywheel. On both of these the band can be replaced on its own, and we sell the band separately.

The rear faces differ in the opposite direction. The M3400 part carries a full circle of threaded holes on its outer face for the pressure plate. The E0301 part has a narrower bolt circle. Same eight holes at the crank, different pattern at the clutch.

Rear face of the M3400 flywheel showing the pressure plate bolt circle

The model prefix has no fixed format

Here is the part that breaks every attempt to write a lookup script.

Yuchai model prefixes do not follow one pattern. Across the flywheel numbers we collected, we found at least eight distinct shapes.

Shape Example Kind of part
Letter plus four digits M3400, L3000, A3206, E0301 most common, platform code
Three digits 532, 630, 330 early or legacy series
Six digits 111000, 801000 gas engine and later series
Four digits plus letter 6105Q legacy family
Letters and digits mixed, five characters M36S1, S52LA, FC7LA, D08JJ, E30G1 later platform codes
Two letters plus digits AV700, SA00M, SC1D2 mixed
Four characters plus digits YM41D1, F5A00 mixed
Prefixed platform code DXL3000, DDL3000 long block assemblies

There is no regex that catches these. A customer who assumes every Yuchai number starts with one letter and four digits will fail on 111000-1005360, on 532-1005060A, and on 6105Q-1005040.

Suffixes add a second layer. We have seen -911, -S, -871, -873 and bare revision letters A through E in the same catalogue family. E0301-1005360 and E0301-1005360-911 are both sold, and no distributor we asked could say what the -911 changes. We do not know either, and we say so.

A 1005360 ending does not always mean flywheel

One conflict is worth flagging because it costs money.

In a published YC4110ZQ parts catalogue, E36F1-1005360 is listed as a flywheel housing. In a distributor list, the same E36F1-1005360 appears as a flywheel assembly. Both are current listings, and they cannot both be right.

We are not going to pick a side. What we will say is that the 1005 block is the crankshaft group by convention, and a flywheel housing belongs in 1600, so the housing listing looks like the typographic error. But the distributor price list is the one buyers actually order from, so the number is in the wild either way. If you are offered E36F1-1005360, ask for a photo before you pay.

The same caution applies to E0301-1005360-911. Two catalogues list it, neither explains it, and we have seen it priced identically to the base number in one place and differently in another.

Four things to check before you order

We ask every Yuchai flywheel enquiry for the same four things, and the order matters.

First, the engine plate. Not the truck model, not the chassis number. The plate on the block gives the full engine designation, for example YC6M360-20 or YC4E160-30, and that is what resolves the prefix.

Second, the ring gear tooth count. Count it on the old part, or send a photo straight on so we can count it. Published figures for flywheels in this range run from 108 teeth on the E0301-1005360 to 110 on the J3614-1005360 with a 380 pressure plate and 159 on the FC7LA-1005361A for a Yutong bus. There is no single tooth count for Yuchai.

Third, the pressure plate bolt circle and diameter. Two flywheels can share a crankshaft flange and differ completely here. The M3400 sample in our photos has a wide outer bolt circle, the E0301 has a narrower one.

Fourth, the housing. If the customer is replacing a flywheel because the starter grinds, the ring gear may not be the whole story. Check the flywheel housing part number as well, because 1600 block parts and 1005 block parts are frequently confused and both are on the same order.

Send those four and we will confirm the level before quoting: flywheel alone, flywheel with ring gear already pressed on, or ring gear only. On the YC6M that third option is the one that saves the most money, and it is the one buyers ask for least often because they do not know it exists as a separate number.

Frequently asked questions

Is E0301-1005360 the same as E0301-1005360-911?

We do not know, and neither does any distributor we asked. Both are sold, both are described as a flywheel and ring gear assembly, and we have found no published change note. Treat them as different until a photo proves otherwise.

Why does one YC4110ZQ engine have thirteen flywheel numbers?

Because the numbers were released against different chassis builds, emission stages and clutch suppliers over the model life. The engine plate identifies the engine; it does not identify which build the truck left the factory with. Only the old part does that.

Does a Yuchai flywheel number always start with one letter and four digits?

No. Across the numbers we collected we found at least eight different prefix shapes, including three digit prefixes like 532 and six digit prefixes like 111000. Any lookup tool that assumes one pattern will miss real parts.

Can I replace only the ring gear?

On both samples shown here, yes. The ring gear is a separate band pressed onto the rim, and the joint is visible from the side. Whether it is worth it depends on the wear on the friction face. If the face is scored or heat cracked, replace the assembly.

How do I tell a flywheel from a flywheel housing by number?

The block after the hyphen is the first clue. 1005 is the crankshaft group and covers flywheels. 1600 is the housing group. This is a convention, not a guarantee, and we have found at least one catalogue that breaks it.

Does Yuchai use the same flywheel on construction and truck engines?

No. On YC6M, M3400-1005061A is the construction flywheel and M3400-1005361B is the truck flywheel for the YC6M360-20. Different numbers, different geometry, same platform prefix.

What does the 911 suffix mean?

Unknown. It appears on E0301-1005360-911 and M36S1-1005360A-911, and no source explains it. We do not guess at suffix meanings, because a wrong guess on a suffix ships the wrong part.

Where these photos come from

Every flywheel in this article was cast in our foundry in Changyi, Shandong, machined on our own CNC line, balanced, and photographed on the shop floor before packing. We make flywheels and ring gears for Chinese, Japanese and European engine families, and we quote against the drawing when a customer has one.

If you are working on a Yuchai enquiry and the number you have came off a box rather than a part, send us the engine plate and three photos. We will tell you which of the six series you are in before we talk about price.

Irene, Changwei International. Email [email protected], WhatsApp and WeChat +86 199 5366 2121. Foundry in Wangke Industrial Zone, Changyi, Weifang, Shandong. FOB Qingdao.

  • Shangchai flywheel part numbers: D06B-001, D06B-102 and D06B-103 explained
  • Dongfeng DDi and DCi11 flywheel part numbers: 1005115, 1005120 and D5010
  • Dachai 1005115 flywheel part numbers: the FAW side of the same prefix
  • Xichai 1005120 flywheel part numbers and three suffix formats
  • Sinotruk MC07, MC11, MC13 and WD615 flywheel part numbers