{"id":2226,"date":"2026-11-13T06:46:09","date_gmt":"2026-11-12T22:46:09","guid":{"rendered":"https:\/\/www.changweiintl.com\/en\/?post_type=ccm_blog&#038;p=2226"},"modified":"2026-11-13T10:23:47","modified_gmt":"2026-11-13T02:23:47","slug":"cummins-isf3-8-flywheel-numbers-325-350-or-380-mm","status":"publish","type":"ccm_blog","link":"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm","title":{"rendered":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm"},"content":{"rendered":"<div class=\"wrap\">\n<p>Five Cummins flywheels sit on one shelf in our shop. Their numbers are 4939161, 5253213, 5256310, 4937924 and 4937926. Four of them belong to the Foton and Dongfeng light trucks that fill the same export orders, and they end up photographed side by side because buyers ask about all of them in the same week.<\/p>\n<p>The inquiry that brings most of these buyers in is one line long. ISF3.8 flywheel, 138 teeth. That line cannot be filled from stock, because the number stamped on a Cummins flywheel does not describe its teeth. It describes a size tier.<\/p>\n<p>This article works through the five numbers we hold and the ring gears that sit behind them. Every figure quoted is attributed to a named catalogue or to one of our own photographs. Where two catalogues disagree, both are printed and neither is chosen.<\/p>\n<h2 id=\"table-of-contents\">Table of Contents<\/h2>\n<ol>\n<li><a href=\"#five-numbers-on-one-rack\">Five Numbers On One Rack<\/a><\/li>\n<li><a href=\"#what-the-number-actually-encodes\">What The Number Actually Encodes<\/a><\/li>\n<li><a href=\"#three-assemblies-one-engine\">Three Assemblies, One Engine<\/a><\/li>\n<li><a href=\"#the-ring-gear-is-its-own-number\">The Ring Gear Is Its Own Number<\/a><\/li>\n<li><a href=\"#why-the-same-number-shows-two-tooth-counts\">Why The Same Number Shows Two Tooth Counts<\/a><\/li>\n<li><a href=\"#what-the-five-parts-in-our-rack-show\">What The Five Parts In Our Rack Show<\/a><\/li>\n<li><a href=\"#reading-the-number-on-the-casting\">Reading The Number On The Casting<\/a><\/li>\n<li><a href=\"#two-neighbour-numbers-that-are-not-isf\">Two Neighbour Numbers That Are Not ISF<\/a><\/li>\n<li><a href=\"#what-to-measure-before-you-order\">What To Measure Before You Order<\/a><\/li>\n<li><a href=\"#questions-buyers-ask\">Questions Buyers Ask<\/a><\/li>\n<li><a href=\"#sources-and-evidence-level\">Sources And Evidence Level<\/a><\/li>\n<li><a href=\"#send-the-old-part-photograph\">Send The Old Part Photograph<\/a><\/li>\n<\/ol>\n<h2 id=\"five-numbers-on-one-rack\">Five Numbers On One Rack<\/h2>\n<p>A truck flywheel is a cast iron disc with a ring of hardened teeth on its outer edge. Set five of them on a bench and the family resemblance is strong. All five of ours carry a toothed band on the rim, a circle of bolt holes at the centre, and a machined face where the clutch sits.<\/p>\n<p>The differences that matter are small and they are all dimensional. The diameter across the friction face. The position of the crank bolt circle. The number of teeth on the ring.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Flywheel front face with the ring gear running around the outer edge, photographed on our shop floor\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf38-4939161-flywheel-clutch-face.jpg\" \/><\/p>\n<p>A wrong diameter will not let the clutch cover sit flat. A wrong bolt circle will not line up. A wrong tooth count will bolt up and then refuse to crank properly, because the starter pinion is meshing against a pitch that was never cut for it.<\/p>\n<p>None of those three numbers is printed in a readable form on the outside of the part. That is the whole problem with ordering from a part number alone.<\/p>\n<h2 id=\"what-the-number-actually-encodes\">What The Number Actually Encodes<\/h2>\n<p>Cummins assigns a distinct number to each finished assembly. The number is a drawing and process identifier, not a specification. Two flywheels with numbers one or two digits apart can share a ring gear, a crank pattern and a clutch face, and then differ in one detail that decides fitment.<\/p>\n<p>What the number reliably tells you is which assembly you are holding. It does not tell you the tooth count, and it does not tell you the diameter unless a catalogue prints both.<\/p>\n<p>Searching a Cummins ISF3.8 flywheel part number returns a fitment list, not a drawing. The list is useful, and it is the reason two sellers can publish the same number against two different tooth counts without either of them inventing anything.<\/p>\n<p>This is why the same question keeps arriving from different directions. A workshop in Lagos orders by the number cast on a broken part. A distributor in Jakarta orders by engine model and tooth count. Both are describing the same flywheel, and neither description is complete.<\/p>\n<p>The heavier Cummins numbers are a separate story. The six-cylinder family, from 6BT through ISBE, is covered in our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/cummins-flywheel-part-numbers\">Cummins flywheel part number guide<\/a>, and the M11 pads are in the <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/cummins-m11-flywheel-4974576-read-the-pads-before-you-order\">4974576 article<\/a>. The light-truck parts below share nothing with them except the brand.<\/p>\n<h2 id=\"three-assemblies-one-engine\">Three Assemblies, One Engine<\/h2>\n<p>For the ISF3.8, one parts catalogue lists three flywheel assemblies with three different size tiers. The same catalogue lists the ring gears as separate items, in two tooth counts.<\/p>\n<table>\n<thead>\n<tr>\n<th>Flywheel number<\/th>\n<th>Listed application<\/th>\n<th>Size tier<\/th>\n<th>Teeth in listings<\/th>\n<th>Evidence level<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>4939161<\/td>\n<td>Foton Cummins ISF3.8, Aumark and Oling light trucks<\/td>\n<td>325<\/td>\n<td>127 in two listings, 138 in one<\/td>\n<td>Two sellers on one platform, plus one independent seller<\/td>\n<\/tr>\n<tr>\n<td>4944495<\/td>\n<td>Foton Cummins ISF3.8<\/td>\n<td>350<\/td>\n<td>not stated in the listing we found<\/td>\n<td>Single catalogue<\/td>\n<\/tr>\n<tr>\n<td>5259641<\/td>\n<td>Foton Cummins ISF3.8<\/td>\n<td>380<\/td>\n<td>138 in two sources<\/td>\n<td>Two independent sellers<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The three tiers climb in even steps. Read the table as three sizes of the same part, not three versions of the same size.<\/p>\n<h3 id=\"where-the-sizes-come-from\">Where The Sizes Come From<\/h3>\n<p>The tier column comes from one catalogue page that groups the ISF3.8 flywheels as 325, 350 and 380. One independent seller describes 5259641 as a 380 mm flywheel with 138 teeth, which agrees with the top tier. We did not find a second catalogue that prints a diameter for 4939161 or 4944495.<\/p>\n<p>That gap matters when a buyer writes 325 and means something else. On a clutch, 325 is a disc diameter. On a flywheel, 325 is the part&#8217;s own diameter, and the friction face behind it has to be larger than the disc that runs on it. If a supplier quotes both a 325 flywheel and a 330 pressure plate against the same line item, one of the two figures is being used loosely.<\/p>\n<h2 id=\"the-ring-gear-is-its-own-number\">The Ring Gear Is Its Own Number<\/h2>\n<p>The tooth count lives on a separate item. For the ISF3.8 the catalogue lists two ring gears:<\/p>\n<table>\n<thead>\n<tr>\n<th>Ring gear number<\/th>\n<th>Teeth<\/th>\n<th>Listed for<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>3905427<\/td>\n<td>127<\/td>\n<td>Foton Cummins ISF3.8<\/td>\n<\/tr>\n<tr>\n<td>3903309<\/td>\n<td>138<\/td>\n<td>Foton Cummins ISF3.8<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Both are listed for the same engine, which means the engine was built with both. A ring gear is pressed onto the flywheel and held by interference alone, so the same casting can carry either one depending on what the build called for.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Edge view of a flywheel in our rack showing the toothed band standing proud of the machined face\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf38-4939161-ring-gear-edge.jpg\" \/><\/p>\n<p>That single fact explains most of the confusion in this family. The flywheel number selects a size. The ring gear number selects a tooth count. Order one number and you have chosen only half the part.<\/p>\n<h2 id=\"why-the-same-number-shows-two-tooth-counts\">Why The Same Number Shows Two Tooth Counts<\/h2>\n<p>Search the number 4939161 and the listings disagree with each other. Two sellers on one parts platform describe it as a 127 tooth assembly for the ISF3.8 and the Foton Aumark. A third seller describes the same number as a 138 tooth assembly.<\/p>\n<p>Neither seller is obviously wrong. Both are describing an assembly that can carry either ring gear. The listings were written from whatever part was on the shelf that day.<\/p>\n<p>Under the honesty rules we apply to this site, that conflict gets printed rather than resolved. Three listings are not three sources either: the two that agree sit on the same platform and may share an origin, so we grade them as one platform plus one independent seller.<\/p>\n<h3 id=\"what-we-do-not-know\">What We Do Not Know<\/h3>\n<p>We do not know which build year received which ring gear, and we did not find a document that states it. Anyone who prints a confident year split for this family is guessing.<\/p>\n<p>We also did not count the teeth on the five parts in our rack. A count taken from a photograph drifts by several teeth depending on perspective, and a wrong number in a table is worse than a blank cell. The blanks in this article stay blank on purpose.<\/p>\n<h2 id=\"what-the-five-parts-in-our-rack-show\">What The Five Parts In Our Rack Show<\/h2>\n<p>Photographs settle some questions and refuse to settle others. Here is what ours show, part by part.<\/p>\n<table>\n<thead>\n<tr>\n<th>Number<\/th>\n<th>What the photograph shows<\/th>\n<th>What it cannot show<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>4939161<\/td>\n<td>Toothed rim, machined face with a raised centre boss, eight holes around the centre bore<\/td>\n<td>Tooth count, diameter<\/td>\n<\/tr>\n<tr>\n<td>5253213<\/td>\n<td>Two cast number plaques on the same face, a ring of small holes near the rim<\/td>\n<td>Tooth count, diameter<\/td>\n<\/tr>\n<tr>\n<td>5256310<\/td>\n<td>Three deep pockets cast into the outer band, a number stamped into the raw band<\/td>\n<td>Tooth count, diameter<\/td>\n<\/tr>\n<tr>\n<td>4937924<\/td>\n<td>Noticeably wide centre bore, six small holes near the rim, eight at the centre<\/td>\n<td>Tooth count, diameter<\/td>\n<\/tr>\n<tr>\n<td>4937926<\/td>\n<td>Wide machined face, eight holes at the centre, a ring of holes near the rim<\/td>\n<td>Tooth count, diameter<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Reverse side of the same flywheel, showing the plain machined back and the centre bore\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf38-4939161-flywheel-reverse.jpg\" \/><\/p>\n<p>The pockets on 5256310 are the most useful single feature in this group. Three deep scallops cast into the outer band are visible from two metres away, in poor light, without cleaning the part. If a buyer sends one photograph of the back of a flywheel, that is the feature to look for first.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Cast side of a 5256310 flywheel showing three deep pockets in the outer band\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf28-5256310-flywheel-cast-side.jpg\" \/><\/p>\n<p>The wide centre bore on 4937924 is the second. It is wide enough that the crank nose and the bolt circle sit in separate rings of material, and the difference is obvious once the two parts are side by side.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Machined face of the 5256310, with the ring of holes near the rim\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf28-5256310-flywheel-machined-face.jpg\" \/><\/p>\n<p>The ISF2.8 part in the same group, 5253213, carries two cast plaques on one face. Both are raised ovals with digits inside. At the zoom we can manage, the last digit of the upper plaque closes on itself and reads as either 3 or 6, so we do not print it as a confirmed number. The second plaque is partly cut off by the rim.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Cast face of a 5253213 flywheel with two raised number plaques\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf28-5253213-flywheel-cast-side.jpg\" \/><\/p>\n<p>That is the honest state of the evidence for this part. The number on our shelf label and the number in the seller listings agree, and the metal does not confirm it at the resolution we have. A buyer who needs certainty should ask the supplier for a rubbing of the plaque, not a photo.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Machined face of the 5253213 flywheel\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-isf28-5253213-flywheel-machined-face.jpg\" \/><\/p>\n<h2 id=\"reading-the-number-on-the-casting\">Reading The Number On The Casting<\/h2>\n<p>Only one of the five carries a legible number in the metal itself. On 5256310 the digits 5256310 are stamped into the unfinished cast band, with a second and shorter code beside them that reads LS 78 in our zoom.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Close-up of the raw cast band with the number stamped into it\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-5256310-cast-number-band.jpg\" \/><\/p>\n<p>On the other four, what looks like a part number is paint. Our own shelf label on 4939161 is green marker on the machined face, written as 4939161 with a second group that reads 0121 28. That is a warehouse mark, not a manufacturer&#8217;s mark, and it proves nothing about what the part is.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Green paint marker shelf label written on the machined face of a flywheel\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4939161-shelf-marker.jpg\" \/><\/p>\n<p>This distinction has cost buyers real money. A part photographed with a marker number sells as that number, and the next part through the same bay inherits the label. When the only evidence is paint, ask for the casting side and a measurement.<\/p>\n<p>Ring gears are separate items in this family, and we cast and machine them in the same shop. The <a href=\"https:\/\/www.changweiintl.com\/en\/product\/gear-ring\">ring gear page<\/a> lists the sizes we quote most often.<\/p>\n<h2 id=\"two-neighbour-numbers-that-are-not-isf\">Two Neighbour Numbers That Are Not ISF<\/h2>\n<p>Two of the numbers in our rack belong to a different branch of the same family. 4937924 and 4937926 are Dongfeng Cummins B-series parts, listed against 4B3.9, ISB4.5, ISB6.7, QSB4.5 and ISG12 engines.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Face of a 4937924 flywheel, with a wide centre bore and a ring gear at the rim\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg\" \/><\/p>\n<p>4937926 carries a second layer of numbers that catches people out. One listing gives 4947183 as the blank number and C5264583 as the number it has been replaced by. Three numbers, one part. Order the wrong layer and the reply is a month of silence.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Reverse of the 4937924, showing the machined back face\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-reverse.jpg\" \/><\/p>\n<p>One Chinese parts site lists 4937924 against 67 engine models, running from B3.9 to QSG12. That list is a lookup table, not a physical interchange claim. A number that fits 67 engines is a number whose applicability was copied between catalogues, and the copy does not prove the part fits.<\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Face of a 4937926 flywheel photographed on our bench\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937926-flywheel-face.jpg\" \/><\/p>\n<p><img decoding=\"async\" loading=\"lazy\" alt=\"Reverse of the 4937926 flywheel\" src=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937926-flywheel-reverse.jpg\" \/><\/p>\n<h2 id=\"what-to-measure-before-you-order\">What To Measure Before You Order<\/h2>\n<p>Four measurements settle almost every ISF flywheel question. None of them needs a workshop, and all four fit in one message.<\/p>\n<h3 id=\"teeth\">Teeth<\/h3>\n<p>Count them. Mark the first tooth with chalk, work around the ring, and write the total down. Do not count a quarter and multiply, and do not trust a count taken from a photo. 127 and 138 differ by eight teeth, which is a small enough difference to disappear into a bad estimate. Our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/flywheel-ring-gear-teeth-count-guide\">guide to ring gear tooth counts<\/a> covers what changes when the count is wrong.<\/p>\n<h3 id=\"diameter-and-face\">Diameter And Face<\/h3>\n<p>Measure across the friction face, not across the teeth. The toothed band sits proud of the face on some parts and flush on others, so a measurement taken over the teeth reads high.<\/p>\n<h3 id=\"centre-bore-and-bolt-circle\">Centre Bore And Bolt Circle<\/h3>\n<p>Measure the centre bore with a caliper across the opening. Then measure the bolt circle centre to centre between two opposite bolts. Eight holes at 45 degree spacing is common across this family, and it is not a distinguishing feature on its own. The measuring method is set out in our <a href=\"https:\/\/www.changweiintl.com\/en\/blog\/flywheel-bolt-circle-measure-pcd-before-you-order\">bolt circle and PCD guide<\/a>.<\/p>\n<h3 id=\"weight\">Weight<\/h3>\n<p>Weigh the part if a scale is at hand. Weight separates a bare flywheel from an assembly, and it separates a casting from a finished part with the ring gear fitted. Our own weight records for this family run from 11 kg to 71 kg across the range, and a two kilogram gap between two samples of the same number is normal when one has a ring gear and the other does not.<\/p>\n<h2 id=\"questions-buyers-ask\">Questions Buyers Ask<\/h2>\n<h3 id=\"does-4939161-have-127-or-138-teeth\">Does 4939161 have 127 or 138 teeth<\/h3>\n<p>Both counts appear in catalogues for the same number. The engine family was built with two ring gears, 3905427 at 127 teeth and 3903309 at 138 teeth, so the same flywheel casting can carry either. The only reliable answer is the count on the part in front of you.<\/p>\n<h3 id=\"can-i-fit-5259641-where-4939161-came-off\">Can I fit 5259641 where 4939161 came off<\/h3>\n<p>Not without checking the diameter. They are listed as different size tiers of the same engine family, 380 against 325. A clutch cover sized for one will not sit correctly on the other.<\/p>\n<h3 id=\"is-4937924-the-same-part-as-4937926\">Is 4937924 the same part as 4937926<\/h3>\n<p>They are different assemblies, listed against overlapping engine models. We treat them as separate parts until a measurement says otherwise. The blank and supersession numbers add a third layer, so confirm all three before quoting.<\/p>\n<h3 id=\"do-you-supply-the-ring-gear-separately\">Do you supply the ring gear separately<\/h3>\n<p>Yes, subject to stock. Ring gears are separate part numbers in this family, and a flywheel ordered without one arrives without one. Say which you need in the inquiry.<\/p>\n<h2 id=\"sources-and-evidence-level\">Sources And Evidence Level<\/h2>\n<table>\n<thead>\n<tr>\n<th>Source<\/th>\n<th>What it states<\/th>\n<th>Level<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>ISF3.8 parts catalogue page<\/td>\n<td>Flywheel assemblies at 325, 350 and 380; ring gears 3905427 at 127 teeth and 3903309 at 138 teeth<\/td>\n<td>Single source<\/td>\n<\/tr>\n<tr>\n<td>Independent parts seller listing<\/td>\n<td>5259641 is a 380 mm flywheel with 138 teeth, with 4947273 as a second number<\/td>\n<td>Single source, agrees with the tier above<\/td>\n<\/tr>\n<tr>\n<td>Parts platform listings for 4939161<\/td>\n<td>127 teeth in two listings<\/td>\n<td>Two sellers, same platform, possibly one origin<\/td>\n<\/tr>\n<tr>\n<td>Independent seller listing for 4939161<\/td>\n<td>138 teeth<\/td>\n<td>Single source, conflicts with the two above<\/td>\n<\/tr>\n<tr>\n<td>Parts platform listings for 4937926<\/td>\n<td>138 tooth ring gear, blank 4947183, superseded by C5264583<\/td>\n<td>Two sellers, same platform<\/td>\n<\/tr>\n<tr>\n<td>Chinese parts site entry for 4937924<\/td>\n<td>Listed against 67 engine models<\/td>\n<td>Single source, treated as a lookup table<\/td>\n<\/tr>\n<tr>\n<td>Our own photographs<\/td>\n<td>Shapes, pockets, bore width, marker numbers<\/td>\n<td>Primary, no measurement<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Nothing in this article comes from a supplier&#8217;s stock photograph, and no dimension was estimated from an image. Where a number is missing, the gap is deliberate.<\/p>\n<h2 id=\"send-the-old-part-photograph\">Send The Old Part Photograph<\/h2>\n<p>If you are replacing an ISF flywheel, send four photographs before the inquiry: the clutch face, the back of the part, the edge where the teeth sit, and any number in the metal. Add the engine plate photo and the count of teeth on the old ring.<\/p>\n<p>That set answers the size question, the tooth question and the number question in one message. It also removes the most common cause of a wrong shipment in this family, which is a buyer quoting a number that was written in marker by somebody else.<\/p>\n<p>Send them through the <a href=\"https:\/\/www.changweiintl.com\/en\/quote\">quote form<\/a> and we will answer with the size tier, the ring gear number and the weight we hold against each.<\/p>\n<p>Best regards,<br \/>\nIrene<br \/>\nChangwei International<br \/>\nEmail: Irene19953662121@gmail.com<br \/>\nWhatsApp \/ WeChat: +86 199 5366 2121<br \/>\nWeb: www.changweiintl.com<\/p>\n<p>Cast iron flywheels, ring gears and housings from our own foundry in Changyi, Weifang, Shandong. IATF 16949. FOB Qingdao. Drawings and samples welcome.<\/p>\n<\/div>\n<p><!-- cw-schema:begin --><br \/>\n<script type=\"application\/ld+json\">{\"@context\":\"https:\/\/schema.org\",\"@type\":\"BlogPosting\",\"headline\":\"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm\",\"datePublished\":\"2026-11-13T06:46:09\",\"dateModified\":\"2026-11-13T06:46:09\",\"author\":{\"@type\":\"Organization\",\"name\":\"Changwei Intelligent Equipment\",\"url\":\"https:\/\/www.changweiintl.com\"},\"publisher\":{\"@type\":\"Organization\",\"name\":\"Changwei Intelligent Equipment\",\"url\":\"https:\/\/www.changweiintl.com\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https:\/\/www.changweiintl.com\/logo.png\"}},\"mainEntityOfPage\":{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\"},\"inLanguage\":\"en\"}<\/script><br \/>\n<!-- cw-schema:end --><\/p>","protected":false},"excerpt":{"rendered":"<p>A Cummins ISF3.8 inquiry usually says one thing: 138 teeth. The number on the flywheel does not carry that information. Three assemblies cover three size tiers, two ring gears cover two tooth counts, and one number appears in catalogues with both counts. Here is what we hold and what the data actually says.<\/p>","protected":false},"author":1,"featured_media":2213,"template":"","meta":{"_yoast_wpseo_focuskw":"Cummins ISF3.8 flywheel part number","_yoast_wpseo_title":"","_yoast_wpseo_metadesc":"","_cw_seo_title_en":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm","_cw_seo_metadesc_en":"On ISF3.8 the flywheel number follows the size tier, not the tooth count. 4939161, 4944495, 5259641, two ring gears, and what to measure first."},"ccm_blog_tag":[231,234,232,233],"class_list":["post-2226","ccm_blog","type-ccm_blog","status-publish","has-post-thumbnail","hentry"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.\" \/>\n<meta property=\"og:description\" content=\"A Cummins ISF3.8 inquiry usually says one thing: 138 teeth. The number on the flywheel does not carry that information. Three assemblies cover three size tiers, two ring gears cover two tooth counts, and one number appears in catalogues with both counts. Here is what we hold and what the data actually says.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\/\" \/>\n<meta property=\"og:site_name\" content=\"Weifang Changwei Intelligent Equipment Co., Ltd.\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/profile.php?id=61573276931730\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-13T02:23:47+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"899\" \/>\n\t<meta property=\"og:image:height\" content=\"1200\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"18 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\",\"name\":\"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/cummins-4937924-flywheel-face.jpg\",\"datePublished\":\"2026-11-12T22:46:09+00:00\",\"dateModified\":\"2026-11-13T02:23:47+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/cummins-4937924-flywheel-face.jpg\",\"contentUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/cummins-4937924-flywheel-face.jpg\",\"width\":899,\"height\":1200,\"caption\":\"Face of a 4937924 flywheel, with a wide centre bore and a ring gear at the rim\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\\\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.changweiintl.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Blog\",\"item\":\"https:\\\/\\\/www.changweiintl.com\\\/blog\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#website\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/\",\"name\":\"Weifang Changwei Inteligent Equipment Co, Ltd\",\"description\":\"Changwei is a China manufacturer of engine flywheels, ring gears, flywheel housings and gear chambers. IATF 16949 certified OEM\\\/ODM supplier.\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.changweiintl.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#organization\",\"name\":\"Weifang Changwei Intelligent Equipment Co., Ltd.\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/1782266646-favicon-512.png\",\"contentUrl\":\"https:\\\/\\\/www.changweiintl.com\\\/wp-content\\\/uploads\\\/2026\\\/06\\\/1782266646-favicon-512.png\",\"width\":512,\"height\":512,\"caption\":\"Weifang Changwei Inteligent Equipment Co, Ltd\"},\"image\":{\"@id\":\"https:\\\/\\\/www.changweiintl.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/profile.php?id=61573276931730\"],\"legalName\":\"Weifang Changwei Intelligent Equipment Co., Ltd.\",\"alternateName\":[\"Changwei\",\"\u6f4d\u574a\u660c\u7ef4\u667a\u80fd\u8bbe\u5907\u6709\u9650\u516c\u53f8\"],\"address\":{\"@type\":\"PostalAddress\",\"streetAddress\":\"Zhicheng World Trade Center, High-Tech Zone\",\"addressLocality\":\"Weifang\",\"addressRegion\":\"Shandong\",\"addressCountry\":\"CN\"},\"contactPoint\":[{\"@type\":\"ContactPoint\",\"contactType\":\"sales\",\"availableLanguage\":[\"en\",\"zh\"],\"email\":\"tony15589697779@gmail.com\",\"telephone\":\"+8615589697779\"}],\"knowsAbout\":[\"engine flywheel\",\"flywheel ring gear\",\"flywheel housing\",\"gear chamber\",\"OEM engine components\",\"IATF 16949 certified manufacturing\"],\"areaServed\":\"Worldwide\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\/","og_locale":"en_US","og_type":"article","og_title":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.","og_description":"A Cummins ISF3.8 inquiry usually says one thing: 138 teeth. The number on the flywheel does not carry that information. Three assemblies cover three size tiers, two ring gears cover two tooth counts, and one number appears in catalogues with both counts. Here is what we hold and what the data actually says.","og_url":"https:\/\/www.changweiintl.com\/en\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm\/","og_site_name":"Weifang Changwei Intelligent Equipment Co., Ltd.","article_publisher":"https:\/\/www.facebook.com\/profile.php?id=61573276931730","article_modified_time":"2026-11-13T02:23:47+00:00","og_image":[{"width":899,"height":1200,"url":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"18 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm","url":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm","name":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm &#8211; Weifang Changwei Intelligent Equipment Co., Ltd.","isPartOf":{"@id":"https:\/\/www.changweiintl.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage"},"image":{"@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage"},"thumbnailUrl":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg","datePublished":"2026-11-12T22:46:09+00:00","dateModified":"2026-11-13T02:23:47+00:00","breadcrumb":{"@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#primaryimage","url":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg","contentUrl":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/11\/cummins-4937924-flywheel-face.jpg","width":899,"height":1200,"caption":"Face of a 4937924 flywheel, with a wide centre bore and a ring gear at the rim"},{"@type":"BreadcrumbList","@id":"https:\/\/www.changweiintl.com\/blog\/cummins-isf3-8-flywheel-numbers-325-350-or-380-mm#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.changweiintl.com\/en\/"},{"@type":"ListItem","position":2,"name":"Blog","item":"https:\/\/www.changweiintl.com\/blog"},{"@type":"ListItem","position":3,"name":"Cummins ISF3.8 Flywheel Numbers: 325, 350 or 380 mm"}]},{"@type":"WebSite","@id":"https:\/\/www.changweiintl.com\/#website","url":"https:\/\/www.changweiintl.com\/","name":"Weifang Changwei Inteligent Equipment Co, Ltd","description":"Changwei is a China manufacturer of engine flywheels, ring gears, flywheel housings and gear chambers. IATF 16949 certified OEM\/ODM supplier.","publisher":{"@id":"https:\/\/www.changweiintl.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.changweiintl.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.changweiintl.com\/#organization","name":"Weifang Changwei Intelligent Equipment Co., Ltd.","url":"https:\/\/www.changweiintl.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.changweiintl.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/06\/1782266646-favicon-512.png","contentUrl":"https:\/\/www.changweiintl.com\/wp-content\/uploads\/2026\/06\/1782266646-favicon-512.png","width":512,"height":512,"caption":"Weifang Changwei Inteligent Equipment Co, Ltd"},"image":{"@id":"https:\/\/www.changweiintl.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/profile.php?id=61573276931730"],"legalName":"Weifang Changwei Intelligent Equipment Co., Ltd.","alternateName":["Changwei","\u6f4d\u574a\u660c\u7ef4\u667a\u80fd\u8bbe\u5907\u6709\u9650\u516c\u53f8"],"address":{"@type":"PostalAddress","streetAddress":"Zhicheng World Trade Center, High-Tech Zone","addressLocality":"Weifang","addressRegion":"Shandong","addressCountry":"CN"},"contactPoint":[{"@type":"ContactPoint","contactType":"sales","availableLanguage":["en","zh"],"email":"tony15589697779@gmail.com","telephone":"+8615589697779"}],"knowsAbout":["engine flywheel","flywheel ring gear","flywheel housing","gear chamber","OEM engine components","IATF 16949 certified manufacturing"],"areaServed":"Worldwide"}]}},"_links":{"self":[{"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/ccm_blog\/2226","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/ccm_blog"}],"about":[{"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/types\/ccm_blog"}],"author":[{"embeddable":true,"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/users\/1"}],"version-history":[{"count":4,"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/ccm_blog\/2226\/revisions"}],"predecessor-version":[{"id":2230,"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/ccm_blog\/2226\/revisions\/2230"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/media\/2213"}],"wp:attachment":[{"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/media?parent=2226"}],"wp:term":[{"taxonomy":"ccm_blog_tag","embeddable":true,"href":"https:\/\/www.changweiintl.com\/en\/wp-json\/wp\/v2\/ccm_blog_tag?post=2226"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}